Model #1106804830 KENMORE Residential Washers

  • Machine Sub-assembly
    3 Results
  • Top And Console Assembly
    3 Results
  • Water System
    3 Results
  • Gearcase/transmission
    3 Results
  • Water System
    3 Results
  • Water System
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I have a washer kenmore electronic fabric care Modl#1106804830that wont fill for certain cycle-cotton sturdy but will fill for pre-wash, water sensor maybe?

A:

Experiencing problems with your washer can be frustrating because you no longer have the convenience of washing your clothes at home. I researched your question and found someone had a similar problem with their washer. I have provided the link below. I hope this helps!

Read More
Jacqueline S -
September 05, 2010
A:

From the description you give I suspect the timer is at fault.

If the unit fills at all then it should be able to fill in all cycles unless the timer is at fault.

I assume you would drain the water out of the washer after adding it to the washer from the humidifier. If not drained the the amount of water from the humidifier could affect the fill of the washer.

Be sure to drain the water out after using the humidifier.

The problem with the timer being at fault is that this is an older washer and the timer is no longer available.

Keep in mind a brand new similar Kenmore washer will start at $239 dollars. This would be a better deal than repairing an old belt drive washer.

Read More
Fred M -
Sears Technician
September 07, 2010
A:

Actually new similar washers start at about $329 and not the $239 listed above which is for a portable washer.

Read More
Fred M -
Sears Technician
September 07, 2010
See more answers

Top Parts