Model #11067761600 KENMORE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

will not stop when door is opened 11067761600 Kenmore Residential dryer

Q:

How do I relpace the heating element in my dryer.

A:

I understand that you want to replace the heating element on your dryer. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below for you to view. I hope the link that I provided is helpful. Have a nice day.

Read More
Alina F. -
August 13, 2011
A:

http://media.fotki.com/1_p,wkqbksqdtrbgttwxgtqsskgwtqkq,vi/kstdgfskbxksrttqdqr/1/1303472/5961857/image57238img-or.jpg

Read More
Anonymous -
August 13, 2011
A:

The image in that URL that is posted in the above response should help you replace that element. I provided a similar illustrated procedure in the image below. Unplug the dryer before accessing internal components.

NOTE: Several other failures besides a bad element can prevent the dryer from heating. If you want to diagnose the failure before replacing that component to avoid the possibility of buying unnecessary parts, reply to this thread and we will assist you further. You could have a problem with the voltage supply, wiring or a blown thermal cut-off fuse that would prevent the element from heating. A bad thermostat could also cause this failure.

You may want to recheck that model number that you submitted. I suspect that you have a model 110.67741600, 110.67751600 or 110.67761600.

Read More
Lyle W -
Sears Technician
August 15, 2011
A:

What is the trick to getting the back of the dryer off. Seems to be spot welded or something.

Read More
Carol -
January 02, 2015
See more answers
Q:

Run and heats for about 2 minutes 11067761600 Kenmore Residential dryer

A:

If the dryer works "perfectly" sometimes check if any options or particular cycle is used when it does work. The thermistor is usually the problem when the dryer runs for 5 minutes and shuts off. The thermistor checks okay when cold but after about 5-10 minutes it heats up and shorts causing the dryer to shut down.  
I recommend testing the thermostats with a meter. Here is a video that will help you with testing.

3387134 THERMOSTAT, INTERNAL-BIAS
3977394 THERMAL CUT-OFF (INCLUDES ILLUS. 48)
3392519 THERMAL FUSE

 
 
 
I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information.
 
Thank you for choosing Sears PartsDirect.com.
 
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
April 09, 2014

Top Parts