Model #11066902690 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How do youservice the element? 11066902690 Kenmore Electric dryer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching model 11066902690; I have posted a link below with the instructions on how to replace the heat element, you can enlarge the instructions by clicking on them once open.

 

I trust this information will help you, we appreciate your business thank for choosing Sears.

 

Read More
Jeff Wallace Jr -
Sears Technician
December 19, 2014
A:

Where is the 'link below' with the instructions? I do not see any 'link' to click on.

Read More
Terence -
December 19, 2014
A:

I also need to replace heating element where is the link??

Read More
LINDA -
January 02, 2015
See more answers
Q:

Remove lint from inside dryer 66922 Sears Turntable

A:

Thanks for the inquiry and for using SearsPartsDirect.com.

Insert a putty knife into the seam where it meets the front panel about 2 inches in from each side. There is a small retainer clip that you will need top depress in order for the panel to release. 
If you go to SearsParts and enter your model number, you can find a helpful illustration under the "Cabinet" heading. The clips I mention are listed as key # 46 just for visual reference. 
Sears recommends that you UNPLUG the dryer before cleaning the interior cabinet. There are live voltages present even with the dryer turned off. Particulary around the heating circuits. I hope you find this information helpful.
To clean the lint duct, you can use an air compressor to blow through the lint filter housing to blow all the excess lint through the duct to the back exhaust hose fitting. This will ensure good breathability for the dryer and avoid long drying times. If you do not have an air compressor, you can purchase a dryer lint brush that you can stick through the exhaust opening at the back bottom and remove all the lint from the rear of the unit.
I have included a blue link below that you may click on to be directed to SearsParts to view the 'Cabinet' schematic to see the clips that need to be undone.
SearsParts Cabinet Schematic for Model 110.66902690

Read More
Sherman_G_Wallace -
Sears Technician
February 21, 2014
Q:

Remove lint from dryer 66902690

A:

Thanks for the inquiry and for using SearsPartsDirect.com.

Insert a putty knife into the seam where it meets the front panel about 2 inches in from each side. There is a small retainer clip that you will need top depress in order for the panel to release. 
If you go to SearsParts and enter your model number, you can find a helpful illustration under the "Cabinet" heading. The clips I mention are listed as key # 46 just for visual reference. 
Sears recommends that you UNPLUG the dryer before cleaning the interior cabinet. There are live voltages present even with the dryer turned off. Particulary around the heating circuits. I hope you find this information helpful.
To clean the lint duct, you can use an air compressor to blow through the lint filter housing to blow all the excess lint through the duct to the back exhaust hose fitting. This will ensure good breathability for the dryer and avoid long drying times. If you do not have an air compressor, you can purchase a dryer lint brush that you can stick through the exhaust opening at the back bottom and remove all the lint from the rear of the unit.
I have included a blue link below that you may click on to be directed to SearsParts to view the 'Cabinet' schematic to see the clips that need to be undone.

SearsParts Cabinet Schematic for Model 110.66902690

Let us know if we can be of any further assistance and thanks for using SearsPartsDirect.com.

Read More
Jeff Wallace Sr -
Sears Technician
February 20, 2014

Top Parts