Model #11066822692 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Replacing a thermistor in Model 11066822692 11066822692

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you in locating the instructions to replace the thermistor on your dryer.






You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
June 02, 2015
A:

Your answer was not of any help. Your didn't say whether or not I had to remove both the top and front panel of the dryer to gain access to the location where the thermistor is mounted. As I said in my question I have a full front panel and don't have a front toe plate. You didn't show anything about where the thermistor is mounted. Other than showing me how to remove the top panel, I would say your answer was a dud.

Read More
Cayton -
June 02, 2015
See more answers
Q:

fuel type 11066822692 Kenmore Residential dryer

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com!

Read More
Barbara -
April 14, 2013
A:

Thank you for contacting Sears Parts Direct with your question about the Kenmore Dryer. This is an electric dryer. If I can be of additional assistance please respond to this thread. Thank you for choosing Sears, we appreciate your business.

Read More
Rachel Morgan -
Sears Technician
April 15, 2013
See more answers
Q:

When I push the start button, the buzzing sound occurs like it wants to start but the drum inside doesn't turn. What might be causing this? Thanks

A:

Kenmore dryers are an appliance we depend on daily and when the drum won't turn, it may be an easy fix according to the link that is provided below. I hope the troubleshooting tips are helpful while waiting on additional information.

Read More
Anna T -
November 12, 2012
A:

This question applies to a Kenmore dryer.

Read More
Brad -
November 12, 2012
A:

Thanks for contacting ManageMyLife.com. I understand how frustrating it is having trouble with your dryer not starting. We are here to help. The buzz could be from the timer motor, when the push to start button is pressed. It could also be coming from the dryer motor. If you have a restriction that is binding the dryer drum and keeping it from turning, it could cause the motor to buzz briefly. Eventually it will shut off because it trips the overload. Manually spin the drum counterclockwise to check for a restriction. If the drum is difficult to turn, then you will need to resolve this friction problem to fix the dryer.If the buzz is apparently coming from the timer motor, you could have a blown thermal fuse that would prevent the dryer from running. To check this fuse, unplug the dryer and remove the back panel. The thermal fuse is on the blower housing as shown in the first image below. You can check this fuse (with the dryer still unplugged) by removing one wire and measuring the resistance across the leads of the component with a multimeter. You should measure near zero ohms of resistance (closed). If you measure infinite resistance (open), then the fuse is blown and will need to be replaced. As a temporary test to verify that this is the component failure that is preventing the dryer from running, you can tape the wires going to the thermal fuse together with electrical tape and then reassemble and test the dryer to see if it will run. If it runs with the thermal fuse bypassed, then replacing the thermal fuse will fix your problem. NOTE: Do not leave this fuse bypassed and continue to run the dryer. This fuse is an essential safety feature of the dryer and must be replaced before using the dryer. The thermal fuse part number is 3392519. Also, if the thermal fuse is blown. I recommend replacing the high limit thermastat. The high limit thermostat part number is 279816. I hope this helps.

To order dryer parts, please visit SearsPartsDirect.com with the model number.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Read More
John H -
Sears Technician
November 13, 2012
See more answers

Top Parts