Model #11066812691 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

wiring diagrams 11066812690 Kenmore Electric dryer

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about a wiring diagram for your Kenmore dryer model 11066812690. I will be happy to help you with this. I have included an image of the wiring diagram at the bottom of this post. 

SAFETY WARNING: Disconnect the power supply before beginning your repair to prevent the risk of electrical shock which can result in property damage, serious personal injury or even death. Internal parts may have sharp edges that can cause serious cuts. Use caution and wear work gloves. If you are not comfortable completing this repair, you can set up service at www.SearsHomeServices.com or by calling 1-800-469-4663 (1-800-4MY-HOME). 
 
I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
June 22, 2015
A:
Rachel Morgan -
Sears Technician
June 22, 2015
See more answers
Q:

Kenmore dryer will not start.

A:

I totally understand how frustrating it can be when your Kenmore Dryer will not start. I found a question in Manage My Life under the Answers button that was similar to the one you asked. While your waiting on an expert answer, I think this information will be very useful to you and will give you the answers your looking for. I attached the link below. I hope this helps!

Read More
Dezeray S -
April 04, 2011
A:

Thank you for your question.

I am sorry you are having a problem with the dryer. I suspect there is something binding the drum. If this happens, the motor will hum when the start button is pushed. I recommend unplugging the dryer, open it back up, and turn the drum by hand. If it is hard to turn, take the front off. Then hold the drum up and turn the drum by hand if it is smooth I suspect the front was causing the problem. The drum has to fit onto the front bearing. Once the front of the dryer is installed, the drum should still turn free.

I hope this is helpful. Please let me know if you need further assistance.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident changing the oil yourself, then you can have it done at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
April 05, 2011
See more answers
Q:

Dryer does not start using start button. All connection checks have been made including 220 v. input. Need circuit manual.

A:

I am sending you a wiring schematic in the image below. You should find it usful in fixing this problem.

If the unit will not start there are several parts that might be at fault but the most likely is the thermal fuse. An electric dryer will not run with an open thermal fuse.

The problem might also be a broken belt. There is a belt switch which will prevent the dryer from running.

I hope the wiring diagram is helpful to you.

I this information is helpful to you but if there are any additional details I may be able to help you further.

Read More
Fred M -
Sears Technician
June 16, 2010

Top Parts