Model #11064996301 KENMORE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts And Optional Parts (not Included)
    3 Results
  • Bulkhead Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

dryer making a clicking noise

A:

I know how disappointing it is when you unable to use your dryer. I researched your question and was able to find a link with helpful information on this type of issue. I attached the link below. I hope this helps.

Read More
Jackie S -
February 20, 2012
A:

Thank you for your question and I understand your concern.

If the dryer is not starting or running when the push to start is pushed, it could have a faulty thermal fuse. The thermal fuse should be tested for continuity with an Ohm meter. The thermal fuse is located on blower wheel housing duct. The front lower access will need to be taken off in order to access the thermal fuse. NOTE: Disconnect the dryer from the power source before servicing the dryer.

I added a YouTube video showing how to access and replace the thermal fuse and a video showing how to test the thermal fuse. If you find the thermal fuse faulty, the part number of the thermal fuse is 3392519 which can be ordered from Sears PartsDirect .

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
Joey S -
Sears Technician
February 21, 2012
See more answers
Q:

Kenmore Dryer Model 110.64996301

A:

I know this type of information can be very helpful for you to have to be safe, especially when replacing a major part on your dryer.�While you are waiting for your expert answer, I did some research on the dryer.�I was unable to locate information that would be helpful with regards to your question at this time. Your expert will answer within 24-48 hours with detailed information.�Thank you for using Manage My Life.

Read More
Joseph P. -
November 19, 2011
A:

Hi Joseph,

Thank you for submitting a question to Manage My Life.

According to the model number you gave me the drum light is in the rear on the bulkhead. I am including the instructions for this procedure in the images below.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Here is a link that you may use to view the parts list diagram and for parts purchases; Sears Parts Direct .

I hope this is helpful. If I may be of further assistance as more details become available, please reply to this post.

Landell

Read More
Landell -
Sears Technician
November 21, 2011
See more answers

Top Parts