Model #11064602301 KENMORE Residential Dryer

  • Top And Console Parts
    3 Results
  • Cabinet Parts
    3 Results
  • Bulkhead Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

3rd posting Kenmore dryer model #110.64602301 stopped running

A:

 Hi,

Thanks for contacting  ManageMyLife.  I understand how frustrating it is having trouble with your appliance.

If there is no resistance and the dryer just shut off in mid-cycle, indicates the push to start switch is not the problem.  It could be the door switch or the thermal fuse. 

What would need to be completed before parts are ordered is to determine which part is at fault by disconnecting the dryer and check the thermal fuse and the door switch. 

The large rear panel is removed to check the thermal fuse; it should read 0 ohms to be good. 

It is tripped by the vent to the outside or something wrong with the lint screen. 

Remember to disconnect power the wall before removing the rear panel.    

Please feel free to let me know if you need further assistance. We are always here to help. Just reply the the thread below. 

Thank you for using ManageMyLife.com.

Bill

Read More
Bill__W -
Sears Technician
September 23, 2013
A:

I have replaced the push to start switch and the thermal fuse and the dryer still does not work. the light does not come on when you open the door nor does the buzzer sound when you turn the timer to off. What else could it be?

Read More
christina -
October 08, 2013
A:

Chris, what volts have you checked? Have you checked the power into the dryer. For the voltage the multimeter will be needed. The light runs off L1 through the door switch to neutral. Use the diagram I provided for you to check the right contacts. Good Luck with it. You might need a technician to check the power if you do not have a multimeter.

Read More
Bill__W -
Sears Technician
October 08, 2013
See more answers
Q:

Kenmore dryer model #110.64602301 stopped running

A:

Thank you for submitting your question. I understand your concern and I will be happy to assist you. Based off of your description, I believe you're problem is with the push to start switch (3977456). This video will assist you with the replacement of this part. You can order parts from our Sears Parts Direct web site. I hope this helps. Please reply back to this thread if you require further assistance. Thank you for using Manage My Life.

Read More
Tykara -
Sears Technician
September 21, 2013
Q:

Kenmore dryer stopped running

A:

Hi,

Thanks for contacting  ManageMyLife.  I understand how frustrating it is having trouble with your appliance.

That would be the push to start switch that you would need to order.

 

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Bill

Read More
Bill__W -
Sears Technician
September 21, 2013

Top Parts