Model #11064212200 KENMORE Residential Dryer

  • Cabinet Parts
    3 Results
  • Top And Console Parts
    3 Results
  • Optional Parts (not Included) Bulkhead Parts
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

heating element always on when running 11064212200 Kenmore Dryer

A:

Thank you for your inquiry on your Kenmore Dryer, Model: 110.64212200. From reviewing the details on your model, if the element coil touches the metal casing this will cause a short to ground that will cause the element to remain on even with the dryer turned off. If the motor switch contacts fuse together the same thing will happen. Both of these components will have to be checked with a meter to confirm the diagnosis. 

Safety Warning: Before beginning the repair, disconnect the direct power supply to the dryer to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
April 25, 2015
Q:

I am looking for diagrams, schematics etc. so I can take a look at the thermostats to check continuity to find what needs replacing for it not heating.

A:

Model number is 11064212200

Read More
Blair -
October 07, 2013
A:

Thank you for choosing Sears Parts Direct. I can certainly understand how frustrating it can be when your dryer is not heating properly. To get a better idea of what type of unit you may have, May I have the model number please? The model number will be located near the door on an industrial sticker. I would like to get you the correct information for your specific unit.

 

Thank you for your question. Have a great day.

Read More
Natasha12 -
Sears Technician
October 09, 2013
A:

Model number is 11064212200

Read More
Blair -
October 09, 2013
A:

Thank you for the model number. I will send you the instructions shortly,. Thank you for your patience.

Read More
Natasha12 -
Sears Technician
October 10, 2013
See more answers
Q:

Dryer will not heat but runs. 11064212200 Kenmore Dryer

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when the dryer isn't heating up.

Glad to help out.   Im  looking at your Kenmore model number 110.64212200.

 

Kenmore electric dryer Heating problems.

 

 

In helping with your dryer.  The first thing to let everyone know is that they must first check there lint screen.  Pull it out and make sure the vent the screen goes into is not plugged.   Next check the vent area where it goes outside the house.   A dryer has to have a free movement of air to prevent heating problems and fire hazzards.

Looking at your electrical dryer you can check all the possiblities that I will give you when it comes to no heat.

1st item to look at is the heating element itself.

2nd item is the  thermal cut-off thermostats which comes as a pair and is installed on the side of the heating element.

3rd item to check and always check this even if the other items are bad.  That is the thermal fuse just attached to the blower.

All of these items have a cause and affect when it comes to the dryer heating problems.   On the picture below you can see the heating element as key number 17, the thermal cut off thermostats as 21 and 15.   The thermal fuse is key number 9.   

the dryer heater parts per model 110.64212200

 If you have further questions please let me know.

Thanks for choosing Sears PartsDirect.com

 

 

Read More
Larry L -
Sears Technician
October 08, 2013

Top Parts