Model #11063032102 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

The back of my dryer does not seem to have a panel. 11063032102

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching model 11063032102; this model can only be accessed thru the front. You will need to unplug the dryer power cord before attempting repair, remove the front service panel this is the panel under the door. You can remove the panel using a flat head screw driver or flat head tool to locate and release the service panel clips that are approximately 4” in from each side. Next pull the panel off. To access the top internal components you can remove the control panel and pry the top panel off using a putty knife, then disassemble the door if needed.

 

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
February 26, 2015
Q:

kenmore dryer 11063032102

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there is problems with the dryer.
 
Glad to help out.   Im  looking at your Kenmore Dryer model number  11063032102.

The back panel is all part of the frame with the 2 sides.  You will need to take the control panel at the top off.   Then remove the top panel.  Need to remove the front top panel and the lower panel to get into the dryer.   You will find the thermal fuse on the blower at the bottom right side of the tub.

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
June 02, 2014
Q:

replacing the timer switch 11063032102 Kenmore Electric dryer

A:

Thank you for choosing Sears Parts Direct. I can certainly understand how frustrating it can be when needing to replace the timer on your dryer. I did look into the model number you have provided and I have found instructions to assist you with your repair. 

  1. Disconnect the power cord. Always unplug or de-energize electrical equipment before removing covers or attempting service. Be careful and wear appropriate hand protection when working around sharp metal parts.
  2. Pull the timer knob off
  3. Remove the screws which were hidden by the knob
  4. Remove the panel from behind the console
  5. Remove one wire at a time and transfer it to the matching terminal on the new timer.
  6. Reverse the procedure to install the timer.
I have attached instructions to assist you.

Let me know if this helps.
You can also visit searpartsdirect.com for parts, diagrams, and repair information.
 
 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services.

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
April 09, 2014

Top Parts