Model #11063014101 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Clothes Dryer 11063014101 Kenmore Dryer

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com

I am sorry and do understand your frustration when there is trouble with the dryer.

Glad to help out.   Im  looking at your Kenmore model number 110.63014101.

Is your dryer heating even a little?   If it is then I know it will not be the heating element.

 In helping with your dryer.  The first thing to let everyone know is that they must first check there lint screen.  Pull it out and make sure the vent the screen goes into is not plugged.   Next check the vent area where it goes outside the house.   A dryer has to have a free movement of air to prevent heating problems and fire hazzards.

Looking at your electrical dryer you can check all the possiblities that I will give you when it comes to no heat.

1st item to look at is the heating element itself.

2nd item is the  thermal cut-off thermostats which comes as a pair and is installed on the side of the heating element.

3rd item to check and always check this even if the other items are bad.  That is the thermal fuse just attached to the blower.

All of these items have a cause and affect when it comes to the dryer heating problems.  I have below a picture of the parts.  Just click on the link please.  Heating element is key number 14.  Thermal cut-off thermostats are key 47 and 48 which comes together.   On the back of the blower you have thermostat key 42 and thermal fuse key number 59.

picture of the heating area for the dryer

 If you have further questions please let me know.

Thanks for choosing Sears PartsDirect.com

 

 

Read More
Larry L -
Sears Technician
November 07, 2013
Q:

dryer model # 11063014101 not starting the start button clicks how to troubleshoot

A:

I know how frustrating it is when your unable to operate an appliance that you frequently use. While your waiting for an expert to respond, I researched your question and found a previous post that will help with your issue. I attached the link below. I hope this helps!

Read More
Jackie S -
January 19, 2012
A:

The start switch 3977456 does not engage any part. It does complete a circuit when pushed to start the dryer. It has nothing to do with the motor continuing to run when the start switch is released.

When an electric dryer doesn't start the most likely cause is an open thermal fuse. The belt switch and door switch are also possibilities. The wiring diagram below may help you with diagnosing this problem.

The push to start switch, thermal fuse, belt switch and door switch can be checked for continuity if a meter is available. Remember to unplug the dryer first.

If you have a meter and wish to do-it-yourself then let me know and I'll provide more information on accessing these parts. The 2nd image will show how to remove the lower access panel. Remember to unplug the dryer first.

You can reply with any additional details for further assistance.

Read More
Fred M -
Sears Technician
January 21, 2012
See more answers
Q:

My electric dryer won't come turn on.

A:

Hi, I see that your having problems with your Sears electric dryer. While you are waiting for an expert to answer your question, What may be helpful is to visit SearsHomeServices.com I have attached the link below. Hope this helps!

Read More
Salina L -
July 27, 2010
A:

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

On something like this I suspect the thermal fuse or belt switch. First; disconnect power to the dryer. Remove the lower front inspection panel per instructions provided in the image below. Use a flashlight to check if the belt is still around the drum & motor. If the belt is ok we need to check the thermal fuse next. You will need an ohmmeter to test the continuity of the thermal fuse. If the thermal fuse reads open continuity it will need to be replaced. Be sure to check for poor venting before replacing the thermal fuse & operating the dryer. Please see the image provided below for the wiring diagram outlining the path of voltage to the motor & access instructions. Other possibilities; timer, motor or wiring harness problems.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Read More
biker dave -
Sears Technician
July 28, 2010
See more answers

Top Parts