Model #11063012101 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How to engage heater assembly into outlet- Kenmore Elite 110 series dryer 11063012101

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your dryer and I do understand your frustration. Glad to help out. I'm looking at your model number 11063012101 and here is a link for a video that will help with the repair.  Just click the blue link above to be taken to the page. I trust this information will help you.
 
Thank you for choosing Sears PartsDirect.com.
 
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.
 

Read More
Sherman_G_Wallace -
Sears Technician
January 20, 2015
Q:

Dryer doesn't heat properly on different temp settings 11063012101 Kenmore Dryer

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
A:

Hi Sherman_G and thanks for noticing I didn't have any replies yet. I do still require assistance/suggestions. I really don't have any updated information on the situation other than I keep running it and it continues to heat sporadically, sometimes just fine, sometimes not. Any ideas anyone can offer would be appreciated, such as the first most likely part to replace. Thanks!

Read More
Rhonda -
May 15, 2014
A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your dryer and do understand your frustration. Glad to help out. Im looking at your model number 11063012101 and there is a good possibility that the tempurature switch needs to be replaced. However there could be one of many other possible causes or failures preventing your electric dryer from heating. I would start diagnosing the problem by disconnecting the heating element after confirming the proper voltage supply. The heating element can be disconnected and tested for continuity with an Ohm meter as well as the thermal cut-off and the high limit thermostat. I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information.
 
Thank you for choosing Sears PartsDirect.com.
 
SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
May 20, 2014
See more answers
Q:

The dryer will not stay running unless I hold the Push to Start button. 11063012101 Kenmore Dryer

A:

I am sorry that you are having some difficulties with your dryer not staying running and I will be happy to help. I did some research and I was able to find a link that will provide you with some good information. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
July 03, 2013
A:

Thank you for using ManageMyLife.com. I'm sorry to hear of the issue you are having with the Push to Start button, I know how frustrating it would be to have to hold and babysit the button for it to work properly.

From the description of your problem the most likely cause of this is a bad motor relay but the problem can also be a bad control, or a door switch issue.

The motor relay on this model is a part of the motor itself and isn't being sold singly. I have attached links to the parts in question below. Just click on the blue link to be taken to the PartsDirect page to view/purchase the necessary parts.

The only way to know for sure which part is the culprit would be to run a volt meter across the components to check for continuity.

Electronic Control for model 11063012101

Motor for model 11063012101

Door Switch for model 11063012101

If you would feel more confident with having a Sears Home Service Technician come to the home and help with diagnosis/repair, click here to be taken to the page to set up service.

If you have any further questions or inquiries, please don't hesitate to ask. Thank you for using ManageMyLife.com.

Read More
Desirea -
Sears Technician
July 03, 2013
See more answers

Top Parts