Model #11062932100 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore dryer won't stay on and won't heat 11062932100

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your dryer. Upon researching model 11062932100; it could be the door switch. Open the door and see if the interior light turns on. If it does not turn on when you open the door or turn off when you push the door switch then it could have failed. If the switch is working then it could be a bad timer or thermal switch. It would be good to check the wiring to make sure the wires are not damaged.

Thank you for choosing Sears. We appreciate your business. Have a great day.                

Read More
Jeff Wallace Jr -
Sears Technician
December 08, 2014
A:

I have the same problem. I push the PTS button and motor starts but does not stay on and when button is held dryer doesn't heat. I have continuity through the thermal fuse and thermal cut off. How can I test the centrifugal switch and should this be the next step.

Read More
Roger -
August 03, 2015
See more answers
Q:

Kenmore Dryer Model # 11062932100 won't heat - 2nd time in 2 1/2 years 11062932100 Kenmore Dryer

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your dryer. Upon researching model 11062932100; you would need to contact he repair department to see what kind of recourse there is. Lint build up I in the exhaust can cause the internal temperature to rise. If the inside of the dryer gets to hot the thermal cut-off will shut the heat off.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
December 31, 2014
Q:

The center burner for the griddle will not light Jgb918bek7bb Ge Gas range

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your range. Upon researching model 11062932100; it sounds like the burner is dirty. If the gas burner is dirty it won’t get proper airflow to ignite the gas. Remove the burner cap and clean the burner head then try igniting.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
December 08, 2014

Top Parts