Model #11062912100 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

dryer will run no heat 11062912100 Kenmore Dryer

A:

Thank you for choosing Sears Parts Direct. I can certainly understand how frustrating it can be when your dryer will not heat. There are multiple parts that could cause a dryer not to heat. The parts are the thermostat, element itself, thermal cut off, thermal fuse. I would recommend testing the element first to see if there is any continuity. You can test it with an Ohms meter. 

Here is a link for you to test the parts.
http://www.searspartsdirect.com/partsdirect/part-model/Kenmore-Parts/Dryer-Parts/Repair-Maintenance/Questions-Answers/Dryer-11062912100-not-working/Model-11062912100/0582/0151200/329007?modelNumber=11062912100

You can also visit searpartsdirect.com for parts, diagrams, and repair information.
 
 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services.

Thank you for your question. Have a great day.

Read More
Natasha12 -
Sears Technician
April 23, 2014
Q:

how to remove #37 (blower wheel) 11062912100 Kenmore Dryer

A:

Searspartsdirect.com is always a great resource to find the answers to your parts questions. Your Sears partsdirect expert will research your question and respond within two business days but usually sooner. Thank you for using Searspartsdirect.com! 

Read More
Yadira B -
March 17, 2013
A:

Thanks for the question about your dryer model 11062912100, I will be glad to assist you. I have attached an image below that demonstrates how to remove the blower from the motor. You should reassemble in reverse order, (all disassembled parts.) This should help you complete your project, if you need additional assistance please reply with details and I will be happy to respond. If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.Ron H.

Read More
Ron H -
Sears Technician
March 19, 2013
See more answers
Q:

dryer runs no heat 11062912100

A:

Good afternoon.... I can understand your concern and you've done a good job at trying to get to the bottom of this problem. I did locate a link that will discuss this situation in greater detail and offers a different perspective that you might not have considered yet. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you as to what might be wrong with your dryer and have a nice day.

Read More
Henry -
January 24, 2013
A:

Thanks for the information about your dryer; sorry you are having a problem with heating.
Based on your description of replacing the Element and thermal fuse, and the dryer worked 20 minutes I would suggest checking the breakers that supply power to the dryer. You must have 240 volts ac +- to the power outlet and to the dryer�s terminal block.
If the above testing shows okay, then you will need to check the circuit and components related to heating. I have attached an image of the wiring diagram below for your use. Start by checking the connections to parts you have replaced first.

Always disconnect power supply before servicing the appliance and when testing live voltage be sure to wear proper safety equipment (gloves and eye protection) also be aware of sharp metals on product

I hope this helps, should you need additional assistance please reply with added details and I will be happy to respond.

Ron H.
If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services .

Read More
Ron H -
Sears Technician
January 25, 2013
A:

Here is the image again.
Ron H.

Read More
Ron H -
Sears Technician
January 25, 2013
A:

hi ron h', i have already checked the breakers and the connection at the back of the dryer. 120 on each leg and 240 accross the two hot. i do not see the attached wiring diagram you mentioned in the last communication. i have already checked the connections for the items i replaced. please help any ideas?

Read More
chip -
January 28, 2013
A:

Here is the image again, sorry it was not there, Be sure you are viewing on the Manage My life web site.
Ron H.

Read More
Ron H -
Sears Technician
January 29, 2013
A:

(I got here from Sears Parts Direct) the spade connectors to the heating element on my model 110.62912100 dryer are attached very tightly - should they simply pull off, or is there some sort of locking compound on there?

Read More
Bryan -
March 16, 2013
A:

OK so they are just on there very tight, perhaps as a consequence of the high heat.. I used a flat-blade screwdriver to wiggle them off. and it seems I cannot delete any of my entries here.

Read More
Bryan -
March 17, 2013
A:

Hello Bryan, yes the spade clips are very tight, if they were loose fitting it would cause overheating and damage to the spades and wiring. Ron H.

Read More
Ron H -
Sears Technician
March 18, 2013
See more answers

Top Parts