Model #11062802100 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:



Question and Answers


Not drying in Moisture Sensing setting 11062802100 Kenmore Electric dryer


Thank you for choosing Sears Parts Direct. I will be more than happy to help with your dryer. Upon researching model 11062802100; there is a dryness sensor in the unit. It could be the sensor has gone out.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
November 26, 2014

Kenmore Dryer does not run


Thank You for choosing Sears and being a valued member. It is unfortunate to hear that you are having issues with your dryer and I do understand your frustration. Glad to help out. I'm looking at your model number 11062802100 and from your description I suspect that the motor is failing. Here is link for a video that will help with troubleshooting and repair. I have included a link to our Parts Direct page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. I trust this information will help you.


Thank you for choosing Sears


SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
October 16, 2014

dryer quit heating up 11062802100


Hello, glad to help.  Thank You for choosing Sears We, at Sears, value your business.
I am sorry and do understand your frustration when there is problems with the dryer not heating as it should.
Glad to help out.  I’m looking at your Kenmore Dryer model number 11062802100.

When it comes to Electric dryers here are all the options to check on when not heating.

All can be checked with an Ohm/volt meter for its continuity open or closed.

You can see all these on the link below when clicked on.

Heating element which is key number 14

Thermal cut off switch which is both key 1 and key 34 together

ON the back of the blower is thermal fuse key number 59

Also on the back of the blower internal thermostat key number 42

Make sure you always keep your lint screen areas clean.


Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our

Read More
Larry Jr -
Sears Technician
September 23, 2014

Top Parts