Model #11062602101 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Dryer runs 50 minutes the stops. 11062602101 Kenmore Electric dryer

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014
Q:

Dryer stopped in middle of cycle and will not restart.

A:

I understand that your dyer stopped in the middle and the cycle and will not restart. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question. Have a great day!

Read More
Alina -
April 27, 2013
A:

Thanks for the information about your dryer model 11062602101, I will be glad to assist you with this. Based on the explanation you provided , the first thing to check would be the door switch, if the door switch goes bad the dryer will not start, also check the wires to the switch for damage. If you have the proper testing equipment, test the power supply at the dryer terminal block, there should read 240 volts ac + - 5%. If the power id lost check your breakers. I have attached a wiring diagram for your convenience.  If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.Ron H.

Read More
Ron H -
Sears Technician
April 29, 2013
See more answers
Q:

Dryer stops during drying cycle.

A:

With the Dryer not functioning properly can be concerning. I have done some research on the Manage My Life website and have located a link similar to your issue. While you are waiting for a detailed reply from an expert I have provided the link below. Have a great day!

Read More
Dezeray -
January 28, 2013
A:

From the description you give I suspect the problem is with the motor. The motor has internal overload that can trip open and prevent the motor from running. It will cool down in 10-15 minutes and the motor will run again for a short time. If a thermal fuse or belt switch is the problem then the motor will not run again till the part is replaced. My first suggestion would be to remove the front panel and check if the motor is covered with lint. The image below will show how to remove the front panel. A vacuum can be used to clean the lint out of the base. If there is no lint then the motor will most likely need to be replaced. I hope this helps. You can reply with any additional details for further assistance.

Read More
Fred M -
Sears Technician
January 29, 2013
A:

If the image above does not enlarge please try the image below.

Read More
Fred M -
Sears Technician
January 29, 2013
See more answers

Top Parts