Model #11060927990 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

I need to know where the four red wires at the bottom of the dryer go.

A:

I know that it can be very frustrating when you are trying to put a dryer back together. From what your are describing it sounds like the wires are coming from the thermal cut off, the thermal fuse, or the thermostat. The links below will provide some additional information on this, and a wiring diagram for the dryer. I hope this helps. Thank you for using Manage My Life.

Read More
aashe -
June 09, 2013
A:

Hi,

 Thanks for contacting ManageMyLife. I understand how frustrating it is having trouble with your appliance not working.

I will not answer as you have it figured out.  Good job.

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Bill

e are always here to help.

 

Thank you for using ManageMyLife.com.

Bill

Read More
Bill__W -
Sears Technician
June 10, 2013
See more answers
Q:

Kenmore 90 Dryer- Wouldn,t heat. Replace cut off-tml, but the new one went out first load. what would cause that and can yuou operate bypassing the cutoff ?

A:

I know how important it is to have a good working dryer in the home so that your freshly washed clothes can be nice and dry. While you are waiting for an expert answer, I did manage to find a link that will provide you with some great tips to help you with the problem you are having with your dryer. I hope my link is useful.

Read More
Joseph P. -
January 05, 2011
A:

Thank you for your question and I understand your concern. Overheating or the lack of air flow will cause the thermal cut-off to fail.

A restriction or blockage in the venting system will cause the heating element to over heat and cause the thermal cut off to fail open.

If the lint filter is covered in clear fabric softener residue, it will restrict air flow and cause the thermal cut-off to fail.

If the heating element happens to burn in half or it sags and welds itself to the heater housing, the element will stay powered up with 120 volts and over heat and cause the thermal cut off to fail. Pull the heating element out of the housing to see if the heater has welded itself to the heater housing.

DO NOT RUN the dryer with the thermal cut-off by passed or you could possibly have a thermal event.

NOTE: Disconnect the power cord from the power source before removing the lower access panel.

Read More
Joey S -
Sears Technician
January 07, 2011
See more answers
Q:

where do I find the thermal fuse on the Model 110.60927990 dryer?

A:

Hi James, The fuse is number 59 on the image below. Hope this helps!

Read More
Barbara H. -
June 20, 2010
A:

The thermal fuse is located behind the lower access panel.

The images below will help you with this.

Remember to unplug the dryer first.

Read More
Fred M -
Sears Technician
June 22, 2010
See more answers

Top Parts