Model #11060812990 KENMORE Residential Dryer

  • Top And Console
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

dryer capacity 11060812990 Kenmore Electric dryer

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

I do apologize due to the age of the product we no longer have the capacity. You would need to measure the unit in order to locate one of similar size. Also your unit is a super capacity so if you go to a retail store and ask for there super capacity they should be the same.

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 


 

Read More
Natasha12 -
Sears Technician
June 17, 2015
Q:

maximum vent length 11060812990 Kenmore Electric dryer

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore dryer.

From the information you have provided above, after researching The maximum length depends on the type of ducting material used. Here is a chart of maximum lengths: exhaust hoods and diameter rigid heavy metal vent:
# of 90 degree turns Maximum length
0 ------------------------ 64 ft.
1 ------------------------ 54 ft.
2 ------------------------ 44 ft.
3 ------------------------ 35 ft.
4 ------------------------ 27 ft.
For exhaust hoods and diameter flexible heavy metal vent:
0 ------------------------ 36 ft.
1 ------------------------ 31 ft.
2 ------------------------ 27 ft.
3 ------------------------ 25 ft.
4 ------------------------ 23 ft.
NOTE: If a combination of rigid and flexible vent is used, use the maximum length for the flexible vent.
For 2 exhaust hoods with rigid heavy metal vent:
0 ------------------------ 58 ft.
1 ------------------------ 48 ft.
2 ------------------------ 38 ft.
3 ------------------------ 29 ft.
4 ------------------------ 21 ft.
For 2 ½ exhaust hoods with flexible heavy metal vent:
0 ------------------------ 28 ft.
1 ------------------------ 23 ft.
2 ------------------------ 19 ft.
3 ------------------------ 17 ft.
4 ------------------------ 15 ft.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
May 26, 2015
Q:

dryer heat 11060812990 Kenmore Electric dryer

A:

Thank you for choosing Sears, I will be more than happy to assist you with your Kenmore dryer.

From the information provided,  I have a couple of parts to check on. First part that might cause the dryer not to heat will be the thermal fuse. This is located on the blower housing. The next part I would recommend to check will be the thermostat. This is also located near the blower housing. Lastly I would recommend checking the heating element. You can access this by removing back panel. These parts all work hand in hand so if it was not the thermal fuse, it might be a good idea to replace all parts.

I hope you found this information helpful. Thank you for choosing Sears Parts Direct. We appreciate your business. Have a great day. 

Read More
Samantha A -
Sears Technician
November 17, 2014

Top Parts