Model #11060094991 KENMORE Residential Dryer

  • Console Panel
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • Dryer Top
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Why does my kenmore elite dryer beeping and not stopping? 11060094991 Kenmore Electric dryer

A:

Thank you for your question.  I am sorry about the problem with your Kenmore 110.60094991 Electric Dryer.  From the description you give I suspect you have a stuck or shorted Keypad.  The console will most likely need to be replaced.  You will need to remove the rear console panel to access the control.  Remember to unplug the dryer first. 

Remove the P3 and P4 connections to the interface then reinsert them and see if there is any improvement.  If not then the interface will need to be replaced.  There are three color choices at the following link: Sears Parts Direct.    I hope this helps.  You can reply below with any additional details for further assistance. 

Read More
Fred M -
Sears Technician
October 13, 2013
Q:

Why is my Kenmore dryer not starting?

A:

Will the dryer power up? If the dryer will not power up, the control board & touchpad assembly will need to be checked with a meter. If the dryer powers up but will not start, the door switch, thermal fuse & belt switch will need to be checked. Open the dryer door & turn the drum manually, if the drum rotates freely the belt could be off. Push in on the door switch with your finger, you should hear it click. If you feel the door switch & belt switch are okay, then the control panel area will need to be accessed in order to make further checks with a meter.

Read More
biker dave -
Sears Technician
August 11, 2008

Top Parts