Model #11060072991 KENMORE Residential Dryer

  • Console Panel
    3 Results
  • Cabinet
    3 Results
  • Bulkhead
    3 Results
  • Dryer Top
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

The Thermistor on Blower Housing 11060072991

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your dryer. Upon researching model 11060072991; check the thermal cut off for continuity. The thermal fuse would prevent the unit from powering up. Check the board for power if the fuse is ok. There may be an issue with the board if it’s receiving power but not power functioning.  Click here for the diagram. The thermal fuse is key number 59.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
August 02, 2015
Q:

Why does my Kenmore Elite electric dryer keep beeping and the lint trap light keeps blinking?

A:

The CHECK LINT SCREEN light should not come on until a cycle is selected. Once a cycle is selected, this light will flash for up to 5 minutes, until the dryer door is opened or the START button is pressed. If your console is not responding, you could have a stuck button or you could have a failed electronic control board. The diagnostic test for the control on this dryer is shown in the image below. If you are able to enter this diagnostic test, you can check the buttons on the control console using the information provided below. If you are not able to enter this diagnostic test, I recommend that you unplug the dryer and open the console. To open the console, remove the plastic end cap on each side of the console to reveal hidden screws that secure the console to the top dryer panel. Remove the screw on each side and then flip the console up and back into the service position. Check the wire harness connections between the console and the electronic control board. If you find no problems then you will may need to replace the control console or the control board. I provided additional technical information that describes an advanced check of the control console. If you are technically inclined, you can use this information if needed to check the console. You may need a service technician to diagnose and repair this failure since it involve more advanced technical checks.

You can order parts from the Sears PartsDirect website. Use your model number to access the parts list diagram for your model of Kenmore dryer.

If you need more help, resubmit your question with additional details.

Read More
Lyle W -
Sears Technician
October 06, 2009
Q:

Kenmore dryer 11060072991 beeped while drying, stopped when opened, won't restart. Drum light is on. Is this a problem in our house's electrical circuits or the dryer?

A:

In reference to your Kenmore dryer 110.60072991:

In some cases the control can be non-functioning and not accept any activation from the customer interface (keypad), to clear and restart the control follow the below listed steps :

  • Unplug or turn the circuit breaker off for a 30 second period.
  • Reconnect the unit to the power source, breaker back on or plug into the wall outlet.
  • Press the Pause/Cancel/Stop button twice to clear the PF in the display
  • Try to start a short cycle to check the operation of the machine by selecting a cycle and pressing and holding the start button until the machine starts

Note: General information for resolution to this problem, is based on information provided in question. Contact certified technician if problem persist. Sears Repair 1-800-469-4663

Read More
Angela R. - Personal Solutions Manager -
Sears Technician
August 26, 2009

Top Parts