Model #11049182990 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Controls And Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Transmission, Motor And Pump
    3 Results
  • Suspension
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

washer does not spin 110.49182990

A:

Thank you for your inquiry on your Kenmore Washer, Model: 110.49182990. From reviewing the details on your model, I have provided a link to a couple of videos which troubleshoot what could cause the washer to not spin.  

Click Here

Safety Warning: Before beginning the repair, disconnect the direct power supply to the wsher to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry93 -
Sears Technician
March 23, 2015
Q:

Washer will agitate in wash cycle but will not spin after water is drained 11049182990 Kenmore Automatic washer

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore washer.

From the information you have provided above, I can understand the frustration of having your washer malfunction, after researching model number 110.49182990. the failure could be the lid switch if the washer is not operating at all during the drain and spin cycles. If it is running and draining but not spinning then it could have a worn belt. the part number for the lid switch is 285935.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
March 20, 2015
A:

After raising the washer off the ground so that I could see what was going on I ran it through a cycle with the lid closed, Fill up was ok, Agitate (wash) worked ok the motor was working fine and it drained all the water out ok, once it went to spin cycle the motor did not run. Is there a timer in the control knob that may have gone bad

Read More
Donald -
March 23, 2015
See more answers
Q:

Washer will not drain 11049182990 Kenmore Automatic washer

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Sherman_G_Wallace -
Sears Technician
May 14, 2014

Top Parts