Model #11047797800 KENMORE ELITE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Tub And Basket Parts
    3 Results
  • Steamer, Pump And Motor Parts, Optional Parts (not Inc
    3 Results
Find part by diagram >

Question and Answers

Q:

how to replace the water level switch 11047797800 Kenmore Elite Residential washer

Q:

meaning of error codes 11047797800 Kenmore Elite Residential washer

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how  frustrating it can be when your washer displays an error code. 

ANALOG PRESSURE SENSOR FAILURE:

If this failure is displayed,the Central Control Unit has
detected amalfunction of the analog pressure sensor.
Possible Causes/Procedure
1.Check if pressure hose is fixed correctly andwithout
holes or damage.
2.Make sure that the airtrap is not blocked.
3.Make sure that the hose is not blocked and nowater
is inside.

W10415587 is the replacment part number for the sensor.

 You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
November 03, 2014
Q:

Need owner manual / product manual

A:

I understand that you are in need of an owners manual for your Kenmore washer. I have taken some time to research your question here on the Manage My Life website and I noticed that someone else had asked a similar question with a posted response from an expert. I attached the link below if you are interested in viewing. I hope the link that I provided is helpful.

Read More
Alina F. -
April 28, 2011
A:

Thank you for your question.

I can understand wanting to have the manual for you washer.

The complete model number for you washer is on the inside door opening of your washer and the 800 number is the last digits of the model number.

This should be the correct manual for your washer.

I will e-mail you the manual if that will be okay.

Thank you for using Manage My Life.

Read More
Sam A -
Sears Technician
April 28, 2011
A:

I have a Kenmore 90 series top loader washing machine it starts banging like the load is off balance but the load is fine looked at it and the brackets are fine I dont see anything broken

Read More
Karem -
June 08, 2011
A:

I can understand wanting to know why your washer is banging during the spin cycle. If you will reply with your model number I will be glad to help you with your problem. Or you could do a new inquiry on the site, ask the expert. Sam A.

Read More
Sam A -
Sears Technician
June 08, 2011
See more answers

Top Parts