Model #11047791701 KENMORE ELITE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Tub And Basket Parts
    3 Results
  • Steamer, Pump And Motor Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

error code f 35 is not listed in my manual. 11047791701 Kenmore Elite Residential washer

Q:

Kenmore elite front load washer error code 74 11047791701 Kenmore Elite Residential washer

A:

Thanks for the inquiry and for using SearsPartsDirect.com.
Sorry to hear of the error you are experiencing with the Kenmore Elite washer, I know how frustrating that is to have occur.
Unfortunately, I do not see a '74' error code applicable for this model. The closest resembling error code I located that could resemble 74 was '24'. You may have to reverify the error. 

The 'F24' fault code indicates a water temperature sensor error. One of the wires connected to the temperature sensor may have vibrated loose causing the error.
The water temperature sensor could also be out of range. The sensor can be disconnected and tested with an Ohm meter for the proper resistance. The temperature sensor is located at the lower back area of the tub.
Please feel free to resubmit your question with any new details. Hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
June 17, 2014
A:

Follow up. I ended up replacing part W10300039 (Washer electronic control board) to get rid of the code 74. My reasoning was that if the code doesn't exist it's probably the part which determines which codes to display is the problem. When the new board was installed I started a diagnostics check which also revealed I needed to replace part 8183186 (washer dispenser switch). Once that was replace the diagnostics cycle ran fine. Followed up with a sanitize washer cycle and now everything appears to be back to full working order.

Read More
Gary -
July 17, 2014
See more answers
Q:

Washer & Dryer leveling feet installation 11047791701

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when needing the feet for the washer.
 
Glad to help out.   Im  looking at your Kenmore Washer model number 11047791701.

You need the specific feet for  your washer.  It goes by the model number.   They do vary and can never use the feet of a pedestal for that of a washing machine.

Sorry  you are having trouble but with the correct leveling feet, it shouldn't be a problem because they just screw into each corner.   I have the leveling foot on the link below.

Leveling foot for the model 
11047791701.

Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 
 

Read More
Larry L -
Sears Technician
May 19, 2014

Top Parts