Model #11047791700 KENMORE ELITE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Tub And Basket Parts
    3 Results
  • Steamer, Pump And Motor Parts
    3 Results
  • Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

what does F35 on a kenmore elite 11047791700 Kenmore Elite Residential washer

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about the F35 code for your Kenmore Elite washer model 11047791700. I will be happy to help you with this.

The F35 code means that an analog pressure sensor malfunction has been detected by the Central Control Unit. Possible causes are:

1.Pressure hose not affixed correctly, has holes or is damaged.
2.The air trap is blocked.
3.The hose is blocked.

SAFETY WARNING: Disconnect the power supply before beginning your repair to prevent the risk of electrical shock which can result in property damage, serious personal injury or even death. If you are not comfortable completing this repair, you can set up service at www.SearsHomeServices.com or by calling 1-800-469-4663 (1-800-4MY-HOME). 
 
I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
May 13, 2015
Q:

I continually get the code message F21 and Sud on each load of wash. I cannot even finish a load of clothes. 11047791700 Kenmore Elite Residential washer

A:

Hello glad to help.  Thank You for choosing Sears PartsDirect.com
 
I am sorry and do understand your frustration when there are problems with an F21 code on the washer. 
 
Glad to help out.   Im  looking at your Kenmore model number 11047791700.

I will give you all the information it tells me on the F21 code:

F21 is Long Drain.   
If the drain time exceeds 8 minutes, "F21" will be displayed, the water valves will turn off and the pump will stop running.  Press PAUSE/CANCEL to drain the machine.  The display will be cleared and the machine will turn off after a maximum of 8 minutes.

POSSIBLE CAUSES/PROCEDURES:

1.  Check the drain hose and make sure it is not plugged or kinked.

2.  Check the water drain pipe make sure it is not clogged.

3.  Unplug washer or disconnect power.

4.  Check the electrical connections at the pump and make sure the pump is running.

5.  Check the drain pump filter for foreign objects.

6.  Plug in the washer or reconnect the power .

7.  If the above does not correct problem the go to step 8.

8.  Unplug washer or disconnect power

9.  Replace the pump.

If you have further questions please let me know.
Thanks for choosing Sears PartsDirect.com

Read More
Larry L -
Sears Technician
February 06, 2014
Q:

line filter 110.47791700

A:


Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
December 06, 2013

Top Parts