Model #11047571604 KENMORE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Tub And Basket Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Leaking door on front loading Kenmore washer model 110.47571604. Bellow is also somehow sticking to the spin basket.

A:

I am sorry that you are having some difficulties with your front load washer and I will be happy to help. I did some research and I was able to find a link that will provide you with some good information. Click here for the link. I hope this helps with your research while you wait for your expert response.

Read More
Joseph P. -
May 14, 2013
A:

Thank you for your question and I understand your concern.

Based on your symptom and details, the tub bearings are most likely worn out which will cause the spin basket to have to much in/out and up and down movement causing the spin basket to rub the bellow. Worn out bearings can also cause the drive belt to derail.

The rear tub assembly for model 110.47571604 is part #W10274605 which can be ordered from Searspartsdirect.

I highly recommend calling a service technician to repair your washer. This is not a do it yourself repair unless you feel confident in doing so.

 If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services.

Read More
Joey S -
Sears Technician
May 16, 2013
See more answers

Top Parts