Model #11047561601 KENMORE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Tub And Basket Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Help with power button on washer. 11047561601 Kenmore Residential washer

A:

Thank you for choosing sears I would happy to help you with your washer. Upon researching model 11047561601; it sounds like you may need to replace the control panel part# W10099605 (white).The control panel  communicates your button selections to the user interface board,  when the control panel is not working usually one or more of the buttons will  not responsive. To remove the control panel (touch pad):

1. Unplug washer or disconnect power.

2. Disconnect touch pad/control panel assembly wire harness from the control board.

3. Remove dispenser drawer.

4. Remove left front screw that was covered by dispenser drawer.

5. Open door, under the center of the touch pad, press tab to release right side of touch pad.

6. On the right hand side the touch pad. Press tab to release right side of touch pad.

7. Gently pry up and release the top of the touch pad. This should completely release the entire touch pad.

 I trust this information will help you, Thank you have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
October 09, 2014
Q:

Stained Bellow 11047561601 Kenmore Residential washer

A:

Thank you for contacting SearsPartsDirect.com with your question about your Kenmore Washer model 11047561601. I am so sorry the bellow is stained. I will be happy to help you with this.

You mentioned that the bellow has been stained since day one. Is this washer still in warranty? If so, please contact our service department at www.SearsHomeServices.com or by calling 1-800-469-4663 (1-800-4MY-HOME).  The technician will be able to determine if the stain is a result of a problem with the washer. If there are no likely causes for the stain, then the stain most likely occurred at the factory.

If the washer is out of warranty you may want to see if the stain can be removed. I have included the link for a washing machine cleaner that will remove build up on the bellow, inside the tub and drain. Depending on what the stain is made of, this may resolve the issues.

Affresh Washing Machine Cleaner

If the stain persists I recommend you check to see if the bellow is properly installed. If it isn’t, then it is likely the grease-like substance is from the bellow coming into contact with a part inside of the cabinet. Check for loose fitting of the bellow. Also look to see if part of it is bent out of place or if there are any holes or rips in it. If the bellow is damaged, it will need to be replaced. I have included that link for you also.

Bellow for Kenmore Washer 11047561601

I hope this answers your question. If you need further assistance, please resubmit your question with additional details. Thank you for choosing Sears, we appreciate your business. 

Read More
Rachel Morgan -
Sears Technician
July 28, 2014
Q:

Drain pump issue 11047561601 Kenmore Residential washer

A:

Thanks for your question- we see that no one from the community responded.  If you still require assistance on this topic, please resubmit your question with any updated information and we will have one of our experts take a look.  Also, we have updated our site to include information regarding common repairs and diagnosis, which can be found here: www.searspartsdirect.com/repair-help.html.  If you are looking for your owner’s manual, it can be found here: http://www.searspartsdirect.com/partsdirect/user-manuals.  Thanks for visiting SearsPartsDirect.com.

Read More
Natasha12 -
Sears Technician
May 13, 2014

Top Parts