Model #11047512600 KENMORE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Tub And Basket Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

No 11047512600 Kenmore Residential washer

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore washer.

From the information you have provided above, I can understand the frustration of having your washer malfunction, after researching model number 110.47512600. I would suggest checking the drain hose for any kinks or clogs. This will cause the washer to leave water in the tub and not spin.. Also check to see if there are any debris in the pump itself. The pump may need replacing because it may not be strong enough to pump out the water properly. Another thing to check is make sure the door is latching properly and not popping open.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
June 24, 2015
A:

I have the same issue. It will not spin on the express wash cycle (I don�??t know about the other cycles). At the end of the cycle, I open the cleanout and drain the water (which seems to all come from the hose leading out of the pump (and not the hose leading from the tub). Then I run it again using the Rinse/Drain & Spin cycle turning off the �??2nd Rinse�??. It will then spin and operate acceptably. Any thoughts on this? I have already blown out the hose and it is not blocked. I also felt the impeller which seems to spin all right and doesn�??t seem blocked.

Read More
Todd -
November 01, 2015
See more answers
Q:

Clean washer cycle gives error 11047512600

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your washer. Upon researching model11047512600; in order to further assist you we will need the error code number. Please submit a new question with the error code number.

I trust this information will help you, we appreciate your business thank for choosing Sears.

 

Read More
CarlosZ -
Sears Technician
June 08, 2015
A:

I am experiencing the same problem -- clean washer cycle gives error rL, I checked the washer drum, but found nothing. I tried the cycle several times and received the same error message. Please help!!!

Read More
DORIS -
October 07, 2015
See more answers
Q:

110.47512600 cycle selector knob won't work


Top Parts