Model #11046752701 KENMORE ELITE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Tub And Basket Parts
    3 Results
  • Steamer, Pump And Motor Parts, Optional Parts (not Inc
    3 Results
Find part by diagram >

Question and Answers

Q:

Kenmore elite he3t steam showing Suds and F35 error.

A:

Good morning... I can fully understand your concern regarding this error code issue. I did locate a link that will discuss your situation in greater detail. Though this link discusses a different model number, the mechanics are likely going to be very similar. Keep in mind that an expert will be responding within the next two business days if not sooner and will likely offer you more information and instruction. I hope this link will help guide you as to what might be wrong with your washer and have a nice day.

Read More
Henry -
April 11, 2013
A:

Thank you... on a sidenote. I did blow through the pressure line and it is clear all the way to the drum. The drain filter has also been cleaned.

Read More
Tyler -
April 11, 2013
A:

I understand that additional information and diagrams can help.  This error is going to be the analog pressure switch as described in the link Henry provided.  I recommend using the information in this post to guide you.  It has the pictures and information needed.  You can order the pressure switch at Sears Parts Direct , part #W10415587. I did add the electrical as requested in the image below.  Please reply if further information is needed.  Thank you for using manage My Life.

Read More
Barbara H. -
Sears Technician
April 12, 2013
A:

I ordered and replaced the pressure switch already. Still throwing the F35 error. I have been through the line all the way down to the bottom of the tub as I mentioned in my first post. What I was wondering is if there is any way to troubleshoot the boards. Trying to find out if it the expansion board or the main control board that might be bad.

Read More
Tyler -
April 12, 2013
A:

Thank you for the reply. I see that you are inside of the washer. The pressure switch is controlled by the steamer electronic board. The steamer diagnostic below may help since you have replaced the pressure switch. The second image has continuity values that may help.

Read More
Barbara H. -
Sears Technician
April 12, 2013
A:

Use this image.

Read More
Barbara H. -
Sears Technician
April 12, 2013
A:

I have now replaced the pressure switch and the steamer control board with new units. I still get the suds/ f35 error right at startup after the initial drain. I get the f35 error right after the C:00 test on the diagnostic mode. When I do the steamer diagnostic by holding start and the steam button I get a yes indicating that the steamer is working. I get the yes regardless of whether the steamer is hooked up. Is there a way to test the steamer assembly? I am kind of narrowing it down to the steamer assembly or the valve that opens to fill the steamer. I ohm checked the valve and it shows good at 800 ohms. This thing is really throwing me. Could it be the motor control board? I know the pressure switch goes into that board. Thanks for the help so far.

Read More
Tyler -
April 17, 2013
A:

Having similar problems. How did you get the problem solved?

Read More
Todd -
July 21, 2013
A:

Hi Todd, I would be happy to help you with your washing machine. I understand how frustrating it can be to receive error codes. If you could please provide me with the model number I would be happy to assit your further.

Thanks for using ManageMyLife.com

Read More
Desirea -
Sears Technician
September 05, 2013
A:

Todd, how did it end? I am at the same point, replaced pressure switch, checked tubing, and cleaned all of the traps. always used he soap, still get the F35.

Read More
Tom -
October 03, 2013
See more answers
Q:

Intermittent F71 Error 11046752701 Kenmore Elite Residential washer

A:

Thank you for your inquiry on your Kenmore Washer, Model: 110.46752701. From reviewing the details on your model, I have provided an insert from the service manual which gives you the information on Error Code F71. 

Safety Warning: Before beginning the repair, disconnect the direct power supply to the washer to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

 

Read More
Gerry 93 -
Sears Technician
May 12, 2015
Q:

code and dispense problem 11046752701 Kenmore Elite Residential washer

A:

Thank you for your inquiry on your Kenmore Washer, Model: 110.46752701. From reviewing the details on your model, I have provided an insert from the service manual, which advices what the error code F20 means.

Click Here

Safety Warning: Before beginning the repair, disconnect the direct power supply to the washer to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
April 17, 2015

Top Parts