Model #11046742701 KENMORE ELITE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Tub And Basket Parts
    3 Results
  • Steamer, Pump And Motor Parts, Optional Parts (not Inc
    3 Results
Find part by diagram >

Question and Answers

Q:

truobleshoot washer 1104674701

Q:

How to remove trim ring and control panel from Kenmore 11046742701? 11046742701 Kenmore Elite Residential washer

A:

Thank you for your inquiry on your Kenmore Washer, Model 110.46742701. From reviewing the details on your model, I have provided a link to a couple of videos on similar models of washers, which should be able to  assist you on replacing the bellow. 

Click Here

Safety Warning: Before beginning the repair, disconnect the direct power supply to the washer opener to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
May 05, 2015
Q:

how to fix washer 11046742701 Kenmore Elite Residential washer

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore washer.

From the information you have provided above, I can understand the frustration of having your washer malfunction, after researching model number 110.46742701. The F35 indicates a water level pressure sensor failure. The SUD is normally displayed when there are excessive detergent suds in the tub. Make sure you are only using the recommended amount of HE detergent. Then run the washer without clothes on a drain and spin cycle. If the tub is empty and you do not see any suds please continue with the following trouble shooting tips. A loose wire harness connection could be causing this problem if there is no water or suds in the tub. I would suggest checking into the wire harness to make sure there is nothing loose. If all looks okay it may be a good idea to have a technician out to diagnose the issue. You can set up service by visiting www.Searshomeservices.com

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

Read More
Benny23 -
Sears Technician
April 14, 2015

Top Parts