Model #11046462500 KENMORE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Pump And Motor Parts
    3 Results
  • Tub And Basket Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

will not DRAIN at the end 11046462500 Kenmore Washer

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore washer.

From the information you have provided above, I can understand the frustration of having your washer malfunction, after researching model number 110.46462500. Since you’ve replaced the pump, the next step I would suggest taking is checking for a clog in the drain hose. There may be a blockage causing the washer to not drain properly.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
May 11, 2015
A:

I have the same problem. I checked my drain lines before purchasing and replacing the pump. The pump gets hot but the blades are not spinning to pump the water out.

Read More
Ken -
October 20, 2015
See more answers
Q:

Washer pump motor gets hot but does not spin 11046462500 Kenmore Washer

Q:

front load won't drain 110-46462500

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore washer.

From the information you have provided above, I can understand the frustration of having your washer malfunction, after researching model number sic you’ve replaced the pump already, the only other parts to cause the washer not to drain would be the drian hose or the control board. I would suggest checking the drain hose for any clogs; make sure the hose is clear and able to completely pump the water out. if the hose is clear than it may be the control board not sending the signal to the pump to kick on.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
May 15, 2015
A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore washer.

From the information you have provided above, I can understand the frustration of having your washer malfunction, after researching model number sic you’ve replaced the pump already, the only other parts to cause the washer not to drain would be the drian hose or the control board. I would suggest checking the drain hose for any clogs; make sure the hose is clear and able to completely pump the water out. if the hose is clear than it may be the control board not sending the signal to the pump to kick on.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
May 15, 2015
A:

There are two boards that control this machine which one do you mean ? Cntrl-elec Part #: 8540483 or Cntrl-elec Part #: W10205973 The drain is clear.

Read More
Ruben -
May 15, 2015
A:

On the previoun question for today there are three boards that control the unit and cost over $100.00 , Is there a way to check which one of these boards is bad. Or is these a place that i can take these boards to be checked out?

Read More
Ruben -
May 15, 2015
See more answers

Top Parts