Model #11045962402 KENMORE ELITE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Door And Latch Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Dispenser Parts
    3 Results
  • Tub And Basket Parts
    3 Results
  • Pump And Motor Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I set the wash cycle back to the factory default settings on my Kenmore Elite washer?

A:

The factory presets are programmed into the control. If your machine experienced a power surge or glitch through the electrical lines, it could be damaged or malfunctioning. You may be able to reset all factory settings on the control by unplugging the washer for several minutes and then plugging it back in.

If this tactic does not correct the problem, then it is likely that you have a problem with the control. Try the other cycles to see if they set the normal spin speed. Also, see if the spin speed can be changed to select a different spin speed in the normal cycle. If it is apparent that the control is not operating properly, I recommend calling a service technician to diagnose and repair this type of problem.

Read More
Lyle W -
Sears Technician
May 28, 2008

Top Parts