Model #11042722200 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Controls And Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Transmission, Motor And Pump
    3 Results
  • Suspension
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

replacing the tub seal but can't get the metal agitator off 11042722200 Kenmore Automatic washer

A:

Owners are great to have when we need to replace parts on appliances. ManageMyLfe.com is a great place to find your owner's manual and installation guides for appliances. I did some research and found the owner�s manual. I have attached the link below. Your expert will follow up and verify this information shortly. If you are having a specific problem please submit your question on the existing tread. Just log back into the website. Go to your profile and find your question you asked and then click on join the conversation and provide that information. This will speed up the process for you and save you some time.

Read More
Dezeray -
February 11, 2013
A:

Thanks. The owners manual, this website and my local appliance store have not been able to help.

Read More
Michele -
February 11, 2013
A:

Hi,

Thank you for your question. It is concerning when your appliance needs to be serviced.

On the side of the agitator is a set screw that is set to hold the agitator on.  It sounds to me like the screw is still threaded into the agitator.  Here are some instructions of the agitator.  

Please feel free to let me know if you need further assistance. We are always here to help.

Thank you for using ManageMyLife.com.

Bill

Read More
Bill__W -
Sears Technician
February 11, 2013
A:

Thanks Bill. I have that part off..the side screw on the plastic part, it's the metal part undernearth it..I have that screw out as well..The diagram appears to show a screw underneath too, but I am not see it.

Read More
Michele -
February 11, 2013
A:

Ok so you will need to reinstall the bolt in the saddle block and just thread it in a couple of turns and use a mallet drive the bolt into the plate. This is to loosen the saddle block up so the metal plate will come up.

Read More
Bill__W -
Sears Technician
February 12, 2013
A:

Hello, Can you send me the diagram referenced in this conversation? I am trying to remove the agitator in my Kenmore compact washer model number 110.42722200 and haven't been able to find the correct diagram. I think this is it but it's so small that I can't see it! I have removed the side screw on the agitator but it will not come up. There is no bolt under the fabric softener dispenser, but something is still pinning it down. Thanks much!

Read More
roxanne -
November 07, 2015
See more answers
Q:

need to replace power cord . insulation frayed where cord enters back of machine.. do i need cord or entire harness?? 11042722200 Kenmore Automatic washer

A:

Thank you for choosing Sears and contacting us with your question about your Kenmore washer model 11042722200. I am so sorry the power cord has frayed. I know how fast the laundry can pile up when the washer isn’t working and I’m sure you want this fixed quickly.  I will be happy to help you with this. 

The power cord attaches to the rest of the wire harness by a plastic connector. If only the power cord is frayed, you can replace just that part. If the damage goes beyond the connector, you will need to replace the wire harness, which includes the power cord. I have included links for both parts. That way you can order just what you need to replace. 

SAFETY WARNING: Disconnect the power supply before beginning your repair to prevent the risk of electrical shock which can result in property damage, serious personal injury or even death. Internal parts may have sharp edges. Use caution and wear work gloves to prevent serious cuts. If you are not comfortable completing this repair, you can set up service at www.SearsHomeServices.com or by calling 1-800-469-4663 (1-800-4MY-HOME).

I hope this answers your question. Thank you for choosing Sears, we appreciate your business. 
 

Read More
Rachel Morgan -
Sears Technician
July 28, 2015
Q:

washer does not work 11042722200 Kenmore Automatic washer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your washer. Upon researching model 11042722200; it sounds like the electronic control board may be at fault. The electronic control board governs the functions of this model so when it fails it can cause the unit to become unresponsive. The electronic control board for this model has been discontinued, there are not current substitutions.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
May 31, 2015
A:

Are there any board level schematics for this control board?

Read More
Rod -
May 31, 2015
See more answers

Top Parts