Model #11029812890 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Control Panel
    3 Results
  • Wiring Harness
    3 Results
  • Brake And Drive Tube
    3 Results
  • Gearcase
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Motor hums but won't start 11029812890 Kenmore Automatic washer

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your washer. Upon researching model 11029812890; Your washer likely has a worn out clutch or it could be possible for the gear case to be leaking and slinging oil on the clutch causing it to slip and not able to release the brake. In order to replace the clutch, the gear case must be removed. I recommend calling a service technician to diagnose and repair your washer because it involves removing the washer cabinet, agitator, pump, motor and gear case just in order to remove and replace the clutch.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
August 17, 2015
Q:

Kenmore clothes washer 80 series Age 11029812890

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your washer. Upon researching model 11029812890; based on the model number provided, this model is from 1998.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
June 09, 2015
Q:

Let me ask it again, my kenmore washer has developed a leak from underneath what is the most likely cause? 11029812890 Kenmore Automatic washer

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your washer and I do understand your frustration. Glad to help out. I'm looking at your model number 11029812890 and from your description I suspect that the pump may be leaking. It can also be the center post gasket. You will need to lift and push the machine back so that you can look under the machine. Here is a link that will help determine where the link is coming from. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
November 04, 2014

Top Parts