Model #11028042701 KENMORE ELITE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Motor, Basket And Tub Parts
    3 Results
  • Pump Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

what do F1 mean 11028042701 Kenmore Elite Washer

A:

Thank you for contacting Sears. I will be more than happy to assist you with your Kenmore washer.

I can understand the frustration of your washer not functioning properly, after researching model number 110.28042701. the F1 error code you’re receiving indicates an issue with the main electronic control board. The main electronic control board is also called the machine control board. The F1 code indicates that the control board is defective. Try to reset the control board by unplugging the washer for 5 minutes. Plug it back in. This will sometimes fix the problem. If the F1 code returns after restoring power to the washer, replace the main electronic control board.

I hope you found this information useful. Again thank you for choosing Sears. We appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
July 24, 2015
Q:

My Kenmore washer Elite is leaking. What seals should I inspect/replace? 11028042701 Kenmore Elite Washer

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your washer is leaking.

 
I suspect the bearing and center shaft seal are the problem. The tub bearing and seal comes with the outer tub. You would need to purchase the complete outer tub in order to replace the bearing and seal .

W10193886 is the outer tub. It is recommended a service technician diagnose and repair this issue.

 You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
June 16, 2015
Q:

Kenmore Elite Top Load Washer 11028042701 F50 error 11028042701

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your washer. Upon researching model 11028042701; the “F50” error code indicates that the motor rotor position sensor does not sense rotation. To fix this problem the technician will check to see if the shipping bolts have been removed from the unit. If the technician has been removed from the unit then the technician will have to determine the cause of the friction causing this problem.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
March 12, 2015

Top Parts