Model #11027741600 KENMORE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

A lot of vibration during spin with no load, transmission seems tight (functioning o k) 11027741600 Kenmore Residential washers

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you. 

An unlevel washer will cause vibration:
  1. Place a level on top of the washer, running from back to front.
  2. Adjust the feet accordingly to get the bubble in the middle.
  3. Place the level on top of the washer, running from left to right.
  4. Adjust the feet accordingly to get the bubble in the middle.
  5. Repeat steps 1-4 until the washer is level in both directions.
I am thinking it is your suspension springs that are going to need to be replaced. 

63907 you will need 3 of them.

110_top_wash_disassem3.jpg (897×562)110_top_wash_disassem.gif (1621×1749) 
You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

 

 

Read More
Natasha12 -
Sears Technician
July 16, 2015
Q:

A lot of vibration during spin with no load, transmission seems tight (functioning o k) 11027741600 Kenmore Residential washers

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you. 

An unlevel washer will cause vibration:
  1. Place a level on top of the washer, running from back to front.
  2. Adjust the feet accordingly to get the bubble in the middle.
  3. Place the level on top of the washer, running from left to right.
  4. Adjust the feet accordingly to get the bubble in the middle.
  5. Repeat steps 1-4 until the washer is level in both directions.
I am thinking it is your suspension springs that are going to need to be replaced. 

63907 you will need 3 of them.

110_top_wash_disassem3.jpg (897×562)110_top_wash_disassem.gif (1621×1749) 
You can also visit searpartsdirect.com for parts, diagrams, and repair information.

 

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
July 16, 2015
Q:

Also is tyhere a small belt ? 11027741600 Kenmore Residential washers

A:

Thanks for the inquiry and for being a valued member.

This washer is direct drive and uses a coupler versus a belt. The coupler is part number 285753A.

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
July 16, 2015

Top Parts