Model #11027612600 KENMORE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

does this have a belt? 11027612600 Kenmore Residential washers

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

I do apologize the model number you listed is an automatic washer that does not contain a belt. You may be referring to the clutch or motor coupling. 

If you didn't get the model number off of your washer would explain why this model doesn't have a belt. I would double check the model number. Also I recommend taking the unit apart to check the parts. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day.

SAFETY NOTICE: Be sure to disconnect power to the unit before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact your local service provider for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Natasha12 -
Sears Technician
August 19, 2015
A:
Natasha12 -
Sears Technician
August 19, 2015
See more answers
Q:

Washer 110.27612600 tripping breaker 11027612600 Kenmore Residential washers

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your washer. Upon researching model11027612600; it sounds like there is an electrical issue. Look at what cycle the unit is on when it trips the breaker. That would indicate what electrical parts could be causing the issue.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

 

Read More
Jeff Wallace Jr -
Sears Technician
March 05, 2015
Q:

Water Level Will Not Change 11027612600 Kenmore Residential washers

A:

Thank you for choosing sears I would be happy to help you with your washer. Upon researching model11027612600; it sounds like you may need to replace the water level switch. The water level switch controls the water level of the washer depending on the selection made, so when it fails it can cause the washer to stay at one water level and not change with the selection. Also make sure that the knob is not stripped inside. I have posted a link below of the water level switch.

I trust this information will help you, have a great day.

Read More
CarlosZ -
Sears Technician
February 03, 2015

Top Parts