Model #11027086601 KENMORE ELITE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Motor, Basket And Tub Parts
    3 Results
  • Pump Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Question and Answers

Q:

My Kenmore Oasis Elite washer is about take off! 11027086601

Q:

Kenmore elite washer does not drain all of water before spin cycle 11027086601

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your washer and I do understand your frustration. Glad to help out. I'm looking at your model number 11027086601 and Ld indicates a long drain. It flashes when the water level does not change after the drain pump is on. Make sure that the drain hose or the drain pump is not clogged, and that the height of the hose is not taller than 96 inches. Also make sure that you can hear the drain pump running. Click here for the test that is recommended for this error. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.




Read More
Sherman_G_Wallace -
Sears Technician
January 26, 2015
Q:

my washing machine keeps displaying code uL unbalanced load it dose it every time no matter what size load

A:

When it comes to a appliance we use in a daily basis and it starts malfunctioning it can be frustrating, something to you while you are waiting for the experts response is a link I have provided you below to Manage my life where a customer posted a similar question that may be helpful. Hope it helps!

Read More
Maira E -
September 21, 2010
A:

If the load is balanced and "UL" continues to display then it could have a friction issue or a software issue. This type of symptom will require a technician to diagnose and repair. If the "UL" code displays with an empty basket then it likely has a mechanical or control board failure.

I recommend calling Sears and scheduling a service appointment. Call Sears at 1-800-4MY-HOME or 1-800-469-4663

Read More
Joey S -
Sears Technician
September 23, 2010
A:

I have a kenmore washer type 580 mod 110.27086601 - Problem: It goes through all the cycles but when it gets to the spin cycle it starts to shake and bang the sides of the washer housing. Then I get and error code of 'uL' (unbalanced Load), then starts the cycle all over. Troubleshooting: I went through the diagnostic/self test by pushing the 'spin speed' button under 'Modifiers' section. Held this button for 5 seconds, 3 times each.

Read More
James -
November 23, 2013
A:

James: If you rebalance the load, does it continue to shake and bang the side panels? How does it spin without a load? Have you checked the suspension? See image below.

Read More
Joey S -
Sears Technician
November 26, 2013
See more answers

Top Parts