Model #11026962501 KENMORE ELITE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts
    3 Results
  • Water System Parts, Miscellaneous Parts, Optional Part
    3 Results
Find part by diagram >

Question and Answers

Q:

How do I remove the agitator? 11026962501 Kenmore Elite Washer

Q:

Washer Capacity 11026962501 Kenmore Elite Washer

A:

Thank you for choosing Searspartsdirect.com and being a valued member. I can certainly assist you.

You will need to measure the unit in order to get the capacity.

 

Calculate Washer Tub capacity


This is a geometric method to calculate tub capacity based on the cylinder volume formula. Unfortunately, the value could be as much as 25% off from the manufacturer stated capacity.

Why? Because the tub is not exactly a cylinder. The edge where bottom connected to the wall is not at 90 degree angle but smooth and rounded. The water line is not clearly marked and the bottom is not always flat. Finally, an agitator also takes capacity away from the tub.

This method can be used as a crude estimate but we do not recommend using it for comparisson when shopping for a new washer.

Determine your washer tub capacity by taking two simple measurements:

Top Loading Washer Tub Capacity Measurements

1. Use the ruler to measure the depth of the tub (indicated by the red line on the diagram)

2. Now find the distance accross the tub, the diameter (the green line on the diagram). Note that some tubs are narrow on top. In this case make the measurements INSIDE the tub.

Solution:

Tub Depth: in.   Tub Diameter: in.


You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
January 12, 2015
Q:

kenmore elite top load washer model 11026962501 will not spin

A:

Something that will have information about your refrigerator section not cooling is your owners manual. If you do not have yours a handy thing about the Manage My Life website is you can go onto the top of the Manage My Life website and click on the tab button then insert your model number into the search box. I have attached a link below which includes your owners manual. I hope the link that I have provided you is useful.

Read More
Alina F. -
November 13, 2010
A:

I do apologize for the mix up I meant to write that the owners manual will give you some troubleshooting information on your washer not spinning.

Read More
Alina F. -
November 13, 2010
A:

I have the manual; thank you. Tried the obvious issues there. The washer will fill and drain but not spin. Cannot rotate the agitator.

Read More
Rich -
November 13, 2010
A:

Thank you for the follow up reply with the model number. It sounds like the motor drive coupler has failed. If the drive coupler fails the unit will fill & drain but have no transmission movement (will not spin or agitate) I am sending you instructions that covers complete step by step information to access the cabinet & related parts in order to reach the drive coupler for replacement.

Remember to disconnect power before attempting access.

Read More
biker dave -
Sears Technician
November 15, 2010
See more answers

Top Parts