Model #11026932690 KENMORE Residential Washers

  • Control Panel
    3 Results
  • Top And Cabinet
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Detergent Rinse Dispenser
    3 Results
  • Water System
    3 Results
  • Wiring Harness
    3 Results
  • Gearcase
    3 Results
  • Brake And Drive Tube
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

No hot warter 11026932690 Kenmore Residential washers

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore washer.

From the information you have provided above, I can understand the frustration of having your washer malfunction, after researching model number 110.26932690. it seems to me like the water inlet valve is not opening on the hot side. I would suggest replacing the valve to resolve the issue. the part# for the valve is 3357901

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
May 09, 2015
Q:

Washer will agitate, but tub won't spin during rinse cycle (model #11026932690) 11026932690 Kenmore Residential washers

A:

Thank You for contacting SearsPartsDirect.com. I do apologize for the delay in answering your question.

Before replaceing the clutch assembly I would recommend check the lid switch. The lid switch it what tells the machine the lid is closed and it is safe to start the spin cycle. 

The switch can be checked with a meter for continuity. Caution: Before attempting any repair unplug the washer from the wall first.

If you need further assistance, please resubmit your question with additional details. Thanks for visiting SearsPartsDirect.com


Read More
Desirea -
Sears Technician
April 08, 2014
Q:

Spin cycle clicking noise 11026932690 Kenmore Residential washers

A:

I know that it can be very frustrating to have issues with your washer. The description of the noise could indicate the motor is not getting run voltage, or it could have a clutch failure, loose spanner nut or worn drive block. In order to know what is causing the problem, the washer will need to be disassembled. This way you can identify which part is making the sound. It is also possible that the washer has an electrical issue within the motor or the wiring harness. If this is the case then you will need an ohm/volt meter to check for an anomalies in the system. If you don't feel comfortable doing this yourself, please click on this link to schedule service: Sears Home Services. Click on "Get Started" and follow the directions, click on the red "NEXT" button to continue. I hope this helps. Please feel free to let me know if you need further assistance. We are always here to help. Thank you for using Manage My Life.com.

Read More
AnneJ -
Sears Technician
September 25, 2013

Top Parts