Model #11026914690 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Control Panel
    3 Results
  • Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Brake And Drive Tube
    3 Results
  • Gearcase
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Why won't my 110.26914690 dispense fabric softener? 11026914690 Kenmore Washer

A:

Thank you for your question. I understand getting the bleach and fabric softeners dispensed is important for the wash. The usual cause of a fabric dispenser  not working correctly is that it is clogged.  I recommend removing and cleaning the dispenser as per the instructions on page 27 of the manual. Another cause is if the fabric softener is poured into the dispenser too quickly. The upsets the siphon action of the dispenser and may cause the softener to dump early. There is not much more to this part.  If further help is needed, please reply.  Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
September 15, 2013
A:

I have cleaned the dispenser with warm water and a lot of shaking to remove "stuff", but dispensing still seems restricted. I am wondering if I have underrated the importance of adding warm water, as if cold cycle is selected I will add cold water. Will add only hot/warm water now and see what happens. Otherwise not sure what else to try. Should I consider buying new dispenser? Have never had this problem.

Read More
jmartz1025 -
September 16, 2013
A:

Hi Jmart.  I would recomend replacing the dispenser, part #63594 . The ony other possible cause is the spin cycle not working correctly.  If you have not noticed a change in the spin speed, it is the dispenser.

Read More
Barbara H. -
Sears Technician
September 19, 2013
See more answers
Q:

how do i remove the top of washing mach. to replace spin switch? model 110.26914690

A:

I'm very happy to help you with this information. I found an unrelated link that will accomplish the goal that you're seeking. It is the same model number and demonstrates how to remove the cabinet of your particular washer. The link also provides you images you can click on to see the process. Click on the link below to access the page. I hope this helps you.

Read More
Henry -
August 02, 2012
A:

I understand how challenging it can be gaining access for repairs. I attached two images below that will help with getting the cabinet off. If you need to order a lid switch it is available here; Sears Parts Direct . The lid switch part number is 3949238.

Please feel free to respond if any additional help is needed. Thank you for using Manage My Life.

Read More
Barbara H. -
Sears Technician
August 03, 2012
See more answers
Q:

Series 90 capacity?

A:

Knowing the capacity of an appliance is very important especially when you are planning on buying a new one. When I needed the capacity of my appliance I went onto the Sears.com website. It has all the dimensions and size information you would need for your appliance. I have attached the link below. Hope this helps, good luck!

Read More
Alina F. -
July 25, 2010
A:

The washer is a 3.0 cubic feet and has super capacity plus.

Read More
Rgabriella02 -
Sears Technician
July 27, 2010
A:

Thanks. This is what I needed.

Read More
joecanuel -
July 27, 2010
See more answers

Top Parts