Model #11026844690 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Control Panel
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Brake And Drive Tube
    3 Results
  • Gearcase
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Remove top control panel on Kenmore Washer 11026844690

A:

 

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your washer. Upon researching model 11026844690; I have posted a link of some videos that can help you access the control panel. To view the link click here.  You will need to remove the left and right hand end cap trim covers as shown in the image. After removing the two end cap trim covers remove the screw located at the bottom of each end cap. Then you can slide the console assembly forwards and then lift it and hinge it over the rear panel.

 

I trust this information will help you, we appreciate your business thank for choosing Sears.

 

 

 

Read More
CarlosZ -
Sears Technician
August 10, 2015
Q:

WHAT ID THE CAPACITY OF THIS WASHER 11026844690 Kenmore Washer

A:

Knowing the capacity of the washer can be very helpful. I did some research on your model number but was not able to find the information. Your expert will be able to help answer your question. It may take two business days for your expert to answer your question. I do hope that everything works out on the washer.

Read More
Marc -
July 01, 2013
A:

Thank you for choosing SearsPartsDirect.com. I understand how important it is to get to know your washing machine. I did not find anything specific about this model. However if this washer is a Kenmore Super Capacity Plus automatic washer, your capacity is 3.2 cubic ft. I hope this will help.
If you would like more assistance, reply to this thread and I will be glad to assist you further. Thank you for using SearsPartsDirect.com.

Read More
Desirea -
Sears Technician
July 01, 2013
See more answers
Q:

motor to pump coupler

A:

An expert shall have an answer to your question shortly. Usually an expert will respond to a question within 24 to 48 hours. Have a great day.

Read More
Alina F. -
June 02, 2011
A:

Thank you for your question and I understand your concern.

I added a YouTube video showing how to access and replace the motor coupler.

Note: Disconnect the power cord from the power source before servicing your washer.

Read More
Joey S -
Sears Technician
June 03, 2011
See more answers

Top Parts