Model #11026842692 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Control Panel
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Kenmore 80 series #11026842692 Washer 11026842692 Kenmore Automatic wahser

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your washer. Upon researching model 11026842692; the bolt would need to be removed. Try holding the lower agitator while turning the bolt. The agitator cam may need to be replaced.

Thank you for choosing Sears Parts Direct. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
August 11, 2015
Q:

Washer fills but won't start 11026842692 Kenmore Automatic wahser

A:

Thank you for choosing SearsPartsDirect.com and being a valued member.  I can certainly understand how frustrating it can be when your washer is not working properly.

 
If this washer has a bad lid switch then it will fill with water but it won't agitate, drain or spin.

I have attached how to test the timer and how to test the lid switch. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
June 15, 2015
A:
Natasha12 -
Sears Technician
June 15, 2015
See more answers
Q:

i have this washer, which has been not used for a while. it leaks water where the pump slides onto the motor shaft. is there a seal there? new pump maybe? 11026842692 Kenmore Automatic wahser

A:

Thank you for choosing SearsPartsDirect. I will be more than happy to assist you with your Kenmore washer.

From the information you have provided above, I can understand the frustration of having your washer malfunction, after researching model number 110.26842692. From the looks of the schematics there doesn’t seem to be a separate gasket in-between the pump and the motor. Therefore, the entire pump will need replacing. The part number for the pump is 3363394.

I hope you found this information useful. Again thank you for choosing Sears, we appreciate your business, have a great day.

*Safety disclaimer before you try and repair the unit make sure the power supply is disconnected. There may be sharp parts to the unit that can cause injury to you if not careful. If you don’t not feel comfortable checking this yourself you can request a technician by visiting www.SearsHomeService.com*

Read More
Benny23 -
Sears Technician
May 12, 2015

Top Parts