Model #11026832690 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Control Panel
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Motor And Pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Brake And Drive Tube
    3 Results
  • Gearcase
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

what is the cucic feet on this washer? 11026832690 Kenmore Automatic washer

A:

Thanks for the inquiry and for being a valued member.

Unfortunately, I was unable to identify the exact cu/ft. capacity of this particular model. I did see the Super Capacity Plus, which typically indicates a capacity of between 3.4 to 4.0 cu/ft. However, to find the exact capacity, you will need to take a few measurements of the tub and make a few calculations. I have linked an article below that will be helpful if you decide to do it. 

Calculating a Washer's Capacity

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
December 31, 2014
Q:

Washer won't agitate or spin on model number 11026832690 11026832690 Kenmore Automatic washer

A:
Samantha A -
Sears Technician
October 16, 2014
A:

Samantha A, no answer is showing up. Would you please respond again? Thank you.

Read More
Lisa -
October 16, 2014
See more answers
Q:

The washer won't go into spin cycle after draining 11026832690 Kenmore Automatic washer

A:

Hello, glad to help.  Thank You for choosing Sears PartsDirect.com.
 
I am sorry and do understand your frustration when having trouble with the washer.
 
Glad to help out.   Im  looking at your Kenmore Washer  model number 11026832690.

When the washer won't go into spin cycle.  The first thing to test with a meter (as long as you know how with the experience) is to test the lid switch first.  
 
Next item to look at is the coupler.   The coupler is what took the place of the belt.   It spins the tub and is found between the motor and the pump.   2 plastic pieces on the outside, with a rubber piece in the middle.

Lid switch #3949238
Coupling #285753A
 
 
Please "RESUBMIT YOUR QUESTIONS IF THERE IS ANY OTHER PROBLEMS".
 
Thank you for your understanding in this matter and I hope we can help you with your future questions and repairs.  Thank you for choosing Sears and using our SearsPartsDirect.com.
 

Read More
Larry L -
Sears Technician
July 23, 2014

Top Parts