Model #11026742502 KENMORE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts
    3 Results
  • Water System Parts
    3 Results
  • Miscellaneous Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

All looks good but won't spin 11026742502

A:

Thank you for choosing SearsPartsDirect. I can certainly understand how frustrating it can be when your washer will not spin. I did look into the model number you have provided and I have found information to assist you. 


Try turning the transmission by hand, in both directions. If it will not turn, it is locked up. Replace it

Check the transmission and let me know so we can do further tests. 

You can also visit searpartsdirect.com for parts, diagrams, and repair information.
 
 
If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for your question. Have a great day. 

Read More
Natasha12 -
Sears Technician
July 11, 2014
Q:

sears 70 series clothes washer will not fill with water

A:

I know how important it is to have a washer fill with the proper amount of water so that it can be water efficient. While you are waiting for an expert answer, I suggest you add to the thread of this question and include the full model number of your washer so that the expert can provide you with a more detailed answer. I did manage to find a great link that describes a similar problem to the one that you are having. Please keep in mind that the link I have provided describes a different part number, I am adding a second link in where you can enter your model number and a parts list diagram will pop up. I hope my links are useful.

Read More
Joseph P. -
January 11, 2011
A:

Thank you for your question.

I am sorry you are having a problem with your washer. Without a model number, I will only be able to give you general information. The first check is the water supply to the washer. I recommend turning the water off to the washer and remove the hoses. Then place the hose in a bucket and turn the water on. This will verify water to the washer and flush the water line. Next, look into the water valve on the back of the washer. You should see a screen in each valve. Make sure the valve screens are clean. If the screens are clean, reattach the hose and turn the water back on. Now start the washer on a wash cycle. If you hear a humming, the valve should be getting voltage. Next select a different water temperature and see if the water will come in. if the water does not come in I would suspect a pressure switch or valve. If you can provide a model number, I can give you more detailed checks to repair the washer.

Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life.

Mark T.

Read More
Mark T -
Sears Technician
January 12, 2011
A:

Purchased the washer from Sears in 2006. Model # is : 110.26742502. Thanks Greg

Read More
onebiglonewolf -
January 12, 2011
A:

Thank you for your reply with the model number. I have taken the time to look up the wiring diagram for your washer. The problem could be a failed timer, pressure switch, temperature switch, or wiring. I do not think it is a failed water valve because it does not fill on any water temp setting. Once you have verified the water supply I recommend unplugging the washer and opening the console. Then check all of the wire connections. After verifying the connections, close the console and check the operation. If the washer still does not fill, I recommend ohming the components. To ohm the pressure switch remove the connector and ohm the terminals where the violet and pink wire connect. The reading should be close to 0 ohms. Next, ohm the temperature switch. Remove the wires and turn the knob to cold and ohm where the pink and yellow with red stripe connect. The reading should be close to 0 ohms. Then remove the cabinet and ohm the water valves. Remove the wires and ohm the terminals of each valve. You should get a reading around 1000 ohms. If any of the ohm reading show OL that component is defective. If all of the readings are ok, I suspect a timer problem.

Read More
Mark T -
Sears Technician
January 13, 2011
A:

Here is the wiring diagram to aid in wire colors.

Read More
Mark T -
Sears Technician
January 13, 2011
A:

Thanks, but turns out the prob was a sticking contact on the "size load" button. You might want to add this to your list of possibilities. However, thanks so much for your help.

Read More
onebiglonewolf -
January 15, 2011
A:

Thank you for the reply. The pressure switch has a few different names. It can also be called the water level switch and load size switch. I am sorry for the confusion. Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
January 16, 2011
See more answers
Q:

Why won't my Kenmore washer let in cold water, model number 11026742502? Is that my inlet value that needs replaced?

A:

In reference to your Kenmore washer, model number 11026742502;

Possible causes for not getting cold water :

  • Is the cold water turned on? If not, turn it on.
  • Is the washer getting hot water but no cold water?
    • If so, check to see if the control panel settings are correct.
  • Is there cold water coming through the proper hose?
    • If not, check to see if the screen inside the water-inlet valve is clean. (The water-inlet valve is the device on the washing machine that the fill hoses are attached to.) If it's clean, you probably have a defective water-inlet valve. If so, you need to replace the valve.

Your Water inlet valve is available at Sears Parts Direct .

Read More
Angela R. - Personal Solutions Manager -
Sears Technician
November 20, 2009

Top Parts