Model #11026642500 KENMORE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts
    3 Results
  • Water System Parts, Miscellaneous Parts, Optional Part
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

what size is washer 11026642500

A:

Thanks for the inquiry and for being a valued member.

Unfortunately, I was unable to identify the capacity of this washer's tub. In this circumstance, I would recommend taking some physical measurements of the tub to make a few calculations to obtain the capacity. To help you do so, I have provided an article below that will walk you through it. 

Washer Tub Cu/Ft Calculator

I hope this helps and thanks for using SearsPartsDirect.com. We appreciate your business. 

Read More
Jeff Wallace Sr -
Sears Technician
April 22, 2015
Q:

Washer spin issue.

A:

Thank You for choosing Sears PartsDirect.com and being a valued member. It is unfortunate to hear that you are having issues with your washer and I do understand your frustration. Glad to help out. I'm looking at your model number 11026642500 and yes the symptoms you are describing would indicate a failing motor coupler. Here is a link that will show you to the repair and well as a link to schedule a service technician. I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. I trust this information will help you.

 

Thank you for choosing Sears PartsDirect.com.

 

SAFETY NOTICE: Be sure to disconnect power to the appliance before performing any repairs. If you are not comfortable with doing any voltage checks that might be recommended, please contact Sears for repairs. Be aware that there could be sharp edges inside the appliance that could cause cuts or other injuries to yourself or others.

Read More
Sherman_G_Wallace -
Sears Technician
October 09, 2014
Q:

Why is my washer making noise during the spin cycle?

A:

Nobody wants to hear noises coming from the appliances, especially a Kenmore washer. I am providing a link that may help you understand what can be causing this noise. Hope this helps while an expert responds.

Read More
Anna T -
June 13, 2012
A:

Thank you for submitting your question. The noise you're hearing is worn spin bearing in your center post for your agitator. The bearing will need to be replaced. Your bearing kit is part number 285203 priced at $38.76. You can order the kit from our Sears Parts Direct team. You'll have to remove the wash basket to access the transmission for removal, to replace the bearing. There is one tool called a spanner wrench which is needed to remove the spanner nut on the basket for removal. The part number for the spanner wrench is 14218862. The images below will assist you in this repair. If you do not feel comfortable performing test or repairing this problem yourself, I recommend scheduling for service. You can schedule for service online with out Sears Home Services team.

Read More
Tykara -
Sears Technician
June 15, 2012
See more answers

Top Parts