Model #11026432500 KENMORE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts
    3 Results
  • Water System Parts, Miscellaneous Parts, Optional Part
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Lint filter location 11026432500 Kenmore Washer

A:

Thank you for choosing sears I would be happy to help you with your washer. Upon researching model 11026432500;  this washer does not have lint filter. I have posted a link below of a video that shows how to reduce the amount of lint that goes in the washer.

I trust that this information will help you, thank you have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
December 23, 2014
Q:

Why does my washer smell like burnt rubber? 11026432500 Kenmore Washer

A:

Thank you for choosing SearsPartsDirect.com. I am sorry to hear that you smell burnt rubber. Generally that smell comes from a worn out motor coupler. That motor coupler may cuase that smell when it is too worn dorn from the gearcase and motor. The part number is 285753A. You can give us a call at 1800-366-7278 or click here to order that coupler. I hope this helps you. Have a great day.

Read More
Samantha A -
Sears Technician
November 18, 2013
Q:

Kenmore washer 110.26432500.

A:

Having a leaking appliance can cause so many problems if you don't take care of it right away. While you are waiting on an expert to answer your question, I found this great link in the Manage My Life website on why Washer leaking. You can also visit Sears Home Services website to set service with a Sears technician. I have attached the links below. Hope this helps!

Read More
Dezeray S -
December 18, 2010
A:

From the location you give I believe the leak is from the 3363394 drain pump.

You can access and change the pump without to much difficulty. On a scale of 1 to 10 (most difficult) I�d put this repair at 4 or 5.

The image below will give you an idea of how to remove the washer cabinet to access and change the pump. Remember to unplug the washer first.

The motor should be okay. When the old pump is removed you can check the motor shaft for any sharp spots that might cause the pump seal to fail.

The pump is available from the following link: Sears PartsDirect .

I hope this information helps you to resolve the problem. You can reply with any additional details for further assistance.

Read More
Fred M -
Sears Technician
December 20, 2010
See more answers

Top Parts