Model #11026322503 KENMORE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts
    3 Results
  • Water System Parts, Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Washer model #110-26322503

A:

I understand the concern with having to find out where this part goes.  I did some research based on the information you provided and added the link (click here).  An expert will reply with further information.  Have a nice day!

Read More
Yadira B -
June 18, 2013
A:

Thanks for contacting manage my life about your washer model 110-26322503, I will be glad to assist you. Thanks you for the description of the part you found behind the washer, based on the description I cannot identify the part and would like more details. Is the part attached to the washer at all? If so where does it appear to attach? , Has the washer been serviced recently? Is the washer malfunctioning? It would be very helpful if you could provide a picture of the part you found. Please reply with the requested information and I will be happy to respond. If you get to the point where you need to have a service technician diagnose and repair this failure, you can schedule service through this link: Sears Home Services. Ron H.

Read More
Ron H -
Sears Technician
June 19, 2013
See more answers
Q:

Washing machine won't spin or wash

A:

A washing machine is definitely something we depend on and when it begins to malfunction it can be a huge inconvenience. While you are waiting for an expert to respond, I have attached some helpful links below that may provide information to assist you with your question.

Read More
Alina F. -
December 10, 2011
A:

Thank you for your question.

By what you have stated, it sounds like a lid switch failure. The lid switch has to be closed for the drain, spin, and wash cycle on your washer to work. If the lid switch is faulty, it will fill but nothing else. A quick check you can do is to jump the lid switch and see if it will drain. If the washer operates, the lid switch needs to be replaced.

To jump the lid switch you need to unplug the washer and open the console. I have provided you with the instructions for opening the console below. Once you have the console open, locate the connector for the lid switch. Place an insulated jumper between the white and gray wires. Not the green it is a ground and will cause a short. After inserting the jumper make sure it will not touch anything metal, plug the washer in. Start the washer in a drain cycle. If the washer drains and spins, you need to replace the lid switch. Do not leave the jumper in while you are waiting for the part. The jumper is only of the test.

Please use the image below to aid in replacing the lid switch.

I hope this is helpful. Please reply below if you need further assistance. Here is a link to order any parts you need. Sears Parts Direct .

If you do not feel confident repairing this problem yourself, then you can have it repaired at your home by a Sears technician. Here is a link for the website: Sears Home Services .

Thank you for using Manage my life. Mark T.

Read More
Mark T -
Sears Technician
December 13, 2011
See more answers
Q:

Why would my washer model 110.26322503 leak water at the bottom when I start a load?

A:

Most of the time water will be leaking from the water pump. It could be the pump itself or where the tubing connects to it. There is also the possibility the tub could be leaking. The complete cabinet on this model can be removed for access to the complete washer mechanism. I'm sending you pictures and instructions for removing the cabinet. A word of caution is be careful if you attempt this because parts of the cabinet are sharp. Also be sure to unplug the power cord from the wall outlet before starting. If you need more assistance you can resubmit your question with more details.

Read More
Scott D -
Sears Technician

Top Parts