Model #11024982300 KENMORE Residential Washers

  • Top And Cabinet Parts
    3 Results
  • Rear Panel Parts
    3 Results
  • Agitator, Basket And Tub Parts
    3 Results
  • Brake, Clutch, Gearcase, Motor And Pump Parts
    3 Results
  • Machine Base Parts
    3 Results
  • Control Panel Parts
    3 Results
  • Wiring Harness Parts
    3 Results
  • Brake And Drive Tube Parts
    3 Results
  • Gearcase Parts
    3 Results
  • Water System Parts
    3 Results
  • Miscellaneous Parts Optional Parts (not Included)
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

i have a kenmore elite washer from 2003 model #110.24982300 when you turn it on it runs continuously

A:

If you indicating that the washer will continuously fill with water but the tub never fills, check the drain hose. It is likely stuffed to far down into the drain pipe and the water is draining by gravity or siphoning. If it just makes a humming noise and does not fill with water it could have a failed water inlet valve, a restricted water inlet valve or no water supply to the washer. If it will fill with water and begin agitating and the timer never advances, the timer has likely failed. I will need additional details in order to help you troubleshoot and repair your washer.

Read More
Joey S -
Sears Technician
June 04, 2010
A:

I have this same problem with the same model. My Cycle selector does not stop after the end of the cycle, it will continually spin and runs through every cycle on the washer. Which part or parts do I need to replace in order to fix the issue?

Read More
DRock -
September 10, 2015
See more answers
Q:

how to change motor coupler 11024982300 Kenmore Automatic washer

A:

Thank you for being Sears’ valued member and for contacting SearsPartsDirect.com with your question about your Kenmore washer model 11024982300. I am so sorry the motor coupler needs to be replaced. I will be happy to help you with how to get started on this repair.

SAFETY WARNING: Disconnect the power supply to the washer before beginning your repair to prevent the risk of injury from electrical shock.

 I have included the image at the bottom on this post with the instructions on how to release the front of the control panel so that you can flip it backwards and out of the way. The instructions will also include the steps on how to remove the cabinet. This will give you access to the pump and motor assembly at the bottom of the washer.

The motor coupler is on the shaft of the motor. Remove the two retaining clips and the motor will come off. Remove the broken parts of the old coupler, install the new one and then reattach the motor with the retaining clips.

If you are not comfortable completing this repair yourself, you can set up service at www.SearsHomeServices.com or by calling 1-800-469-4663.

I hope this answers your question. Thank you for choosing Sears, we appreciate your business.

 

Read More
Rachel Morgan -
Sears Technician
November 08, 2014
A:
Rachel Morgan -
Sears Technician
November 08, 2014
See more answers
Q:

Control watet temperature. 11024982300 Kenmore Automatic washer

A:

Thank You for choosing Sears PartsDirect.com. I regret to hear that you are having issues with your washer and do understand your frustration. Glad to help out. Im looking at your model number 11024982300 and from your description it sounds like the water valve is beginning to fail. I have included  a video that will show you how to test the water valve. I have included a link to our PartsDirect page where you can purchase the part you need to complete your repair. Just click the blue link above to be taken to the page. If you have further questions please resubmit your question for further information.
 
 
Thank you for choosing Sears PartsDirect.com.
 

Read More
Sherman_G_Wallace -
Sears Technician
April 03, 2014

Top Parts