Model #11024902200 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Rear Panel
    3 Results
  • Agitator/basket/tub
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Control Panel
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
  • Brake And Drive Tube 388952
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

Timer 110.24902200

A:

Thank you for choosing Sears Parts Direct. I will be more than happy to help with your washer. Upon researching model110.24902200; it sounds like the timer that you have received may be defective. The symptoms described are normally caused by a bad timer, if you purchased the timer from Sears Parts Direct you can call 1-888-205-0966 to get a replacement.

I trust this information will help you, we appreciate your business thank for choosing Sears.

Read More
CarlosZ -
Sears Technician
June 16, 2015
Q:

waiting on answer to question about load gear noise when rinse cycle engages 11024902200 Kenmore Automatic washer

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your washer. Upon researching model 11024902200; the clutch would affect the spin cycle. If the noise occurs during the spin cycle then it could be the clutch needs to be replaced. If the noise occurs when the drain cycle begins then it could be the drain pump is going out. I don’t recommend applying grease to the clutch.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
January 19, 2015
Q:

load noise when drain gear engages. was told by someone at sears that the clutch needs grease. what kind and where do I apply it? 11024902200 Kenmore Automatic washer

A:

Thank you for choosing Sears Parts Direct. I will be happy to help with your washer. Upon researching model 11024902200; the clutch would affect the spin cycle. If the noise occurs during the spin cycle then it could be the clutch needs to be replaced. If the noise occurs when the drain cycle begins then it could be the drain pump is going out. I don’t recommend applying grease to the clutch.

Thank you for choosing Sears. We appreciate your business. Have a great day.    

Read More
Jeff Wallace Jr -
Sears Technician
January 19, 2015

Top Parts