Model #11023822100 KENMORE Residential Washers

  • Tio Abd Cabinet
    3 Results
  • Control Panel
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
  • Brake And Drive Tube 388952
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

How to remove top of Kenmore 80 series washer to replace lip switch. model 11023822100

Q:

washer shuts off in rinse cycle without draining water 110.23822100

A:

Thank you for your inquiry on your Kenmore Washer, Model:110.23822100. From reviewing the details on your model, if the washer will agitate and then stop and not drain and then spin; it likely has a broken or faulty lid switch. If the washer will drain and spin and is not filling up with rinse water then it may have a faulty water inlet valve, restricted filter screen in the inlet port of the inlet valve or fill hose or it could have a faulty timer or temperature switch.When the dishwasher begins washing and if the drain hose is connected to the garbage disposal, look down into the disposal and see if water is not being pumped out of the drain hose.

Safety Warning: Before beginning the repair, disconnect the direct power supply to the washer to prevent the risk of injury or any electrical shock.

If you don’t feel comfortable or confident in this repair, then you can have it repaired at home by a sears technician. I have the included a link to the website: Sears Home Services or call 1-800-469-4663.

 

I hope this answered your question. Thank you for contacting SearsPartsDirect.com, and have yourself a wonderful day. 

Read More
Gerry 93 -
Sears Technician
June 25, 2015
Q:

tub does not empty 11023822100 Kenmore Automatic washer

A:

I will be happy to help with your washer. Upon researching model 11023822100; it could be the drain hose is clogged or kinked. If not then the pump could have failed. I linked a diagram below. The pump is number 22.

Thank you for choosing Sears. We appreciate your business. Have a great day.

Read More
Jeff Wallace Jr -
Sears Technician
October 29, 2014
A:

Same problem. I replaced the pump - it did the same - adjitated, spun, but did not pump out water. Also tried a different motor, same results. I assume it is in the timer?

Read More
Roger -
June 14, 2015
See more answers

Top Parts