Model #11022994103 KENMORE Residential Washers

  • Top And Cabinet
    3 Results
  • Rear Panel
    3 Results
  • Agitator, Basket And Tub
    3 Results
  • Brake/clutch/gearcase/motor/pump
    3 Results
  • Machine Base
    3 Results
  • Control Panel
    3 Results
  • Wiring Harness
    3 Results
  • Water System
    3 Results
  • Miscellaneous
    3 Results
  • Brake And Drive Tube 388952
    3 Results
Find part by diagram >

Error Codes

Error Code:

Condition:

Check/Repair:

Question and Answers

Q:

.NO MOD#11022994103 IN YOUR DIRECTORY

A:

I understand that you are looking for an owners manual for your Kenmore washer. Luckily I was able to locate your manual here on the Manage My Life website. I attached the link below if you are interested in viewing. I hope this is helpful.

Read More
Alina F. -
March 13, 2011
A:

Thank you for your question and I understand your concern.

The link Alina F. provided in the first response will be the Owner's Manual and Installation Instructions in which you can view and save.

Read More
Joey S -
Sears Technician
March 14, 2011
See more answers
Q:

How do you change a bleach hose for a model 110.22994103 washer.

A:

If the serial number is before the CT beginning of the serial number then you would replace the entire tub ring assembly part number 8528150.

The image below will show you how to access the tub ring to replace it. Your particular model has two end caps that must be removed to access the two screws holding the console down.

I hope this information is helpful to you but submit another question with any additional details for further assistance.

Read More
Fred M -
Sears Technician
February 16, 2010
Q:

Why is my Kenmore washer overfilling in the rinse cycle?

A:

From what you’re describing it sounds like the water level switch needs replaced. If the pressure hose, water valve & air dome check good then I recommend replacing the water level switch part number 3366845.

Read More
biker dave -
Sears Technician
December 22, 2009

Top Parts